Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Rowe ami r-84 no power  (Read 1787 times)

0 Members and 1 Guest are viewing this topic.

Carlkip

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 1
  • Last login:February 25, 2017, 02:58:07 pm
  • I want to build my own arcade controls!
Rowe ami r-84 no power
« on: February 24, 2017, 10:07:25 am »
Hi I have just bought a Rowe ami r-84 jukebox it came as spares or repair I have tried putting it together as best I can it does not have any powe when I turn it on I have bought a service manual but am no electrician any advice of where to start would be appreciated many thanks carlkip

ami-man

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1085
  • Last login:July 19, 2020, 01:22:45 pm
Re: Rowe ami r-84 no power
« Reply #1 on: February 26, 2017, 06:27:25 am »
Hi Carlkip,

You had better check out the power supply (junction box) for any dry joints (cold joints USA) on the connection pins to the power supply PCB, check all the diodes with a diode test if your meter has one.

If the above is too much for you get your power supply checked out by a Rowe Ami service engineer.

Regards
Alan

Alan Hood
ami-man
UK