Author Topic: Using existing speakers in a Fast & Furious cabinet for a console racing setup (Read 1896 times)

Lukenatme · « **on:** February 05, 2017, 05:47:06 pm »

I have a mostly empty Fast and Furious cabinet that I'm looking at using for Xbox One driving games. The speakers are all simple, (+) and (-) tabbed speakers. Two are below the marquee, one is under the steering section, one is in the head rest, and the sub is in the seat, I believe. Do I just run new speaker wire to each speaker/subwoofer and then run those to an amplifier with optical inputs, then the optical to the Xbox One?

shaolindrunkard · « **Reply #1 on:** February 05, 2017, 06:07:08 pm »

Pretty much yeah.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Using existing speakers in a Fast & Furious cabinet for a console racing setup (Read 1896 times)

Lukenatme

Using existing speakers in a Fast & Furious cabinet for a console racing setup

shaolindrunkard

Re: Using existing speakers in a Fast & Furious cabinet for a console racing setup