Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news


  

Author Topic: Rowe R-84 Prelude  (Read 586 times)

0 Members and 1 Guest are viewing this topic.

mkballard77

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • I want to build my own arcade controls!
Rowe R-84 Prelude
« on: January 22, 2017, 04:33:58 pm »
I have a Rowe R-84 Prelude Jukebox. It sounds great, but a couple selections don't play. I have records in the slots, but when I pick those, nothing happens. I can select other ones, so I'm fairly certain it isn't the buttons. Other selections will play. It just refuses to play certain slots. any ideas where to start?

ami-man

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 950
Re: Rowe R-84 Prelude
« Reply #1 on: January 23, 2017, 07:29:41 am »
Hi mkballard77,

Are these selections that it will not play ending with the third digit 8 or 9?

if the above is the case you may have fitted a RI-3 to RI-5 Pricing Board, check that there is not a diode in these two locations on the pricing board CR333 (160 play) and CR334 (RI-3)

Regards
Alan

Alan Hood
ami-man
UK

mkballard77

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • I want to build my own arcade controls!
Re: Rowe R-84 Prelude
« Reply #2 on: January 24, 2017, 04:29:32 pm »
Right now, it's 108/208 & 144/244 that won't play.

ami-man

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 950
Re: Rowe R-84 Prelude
« Reply #3 on: January 25, 2017, 08:17:15 am »
Hi mkballard77,

Test the keyboard switches for continuity with a meter, check the top and bottom connections on the pricing board for dry joints (cold joints USA) on the connection pins, regard the pricing board as a glorified connector rather than a credit device because all lines of data go through this board.

Regards
Alan

Alan Hood
ami-man
UK

  
 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31