Main > Software Forum
[Discontinued][17-09-22] RatRefresh - refresh rate switcher, stops LCD tearing
trevorp:
That sucks about your other account, I'm sure it'll get sorted out.
No joy so far. Here are the results of my morning testing.
--- Code: ---D:\Utilities\RatRefresh_0.14_test>type edid.txt
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083\1&8713bca&0&UID0
--- End code ---
--- Code: ---D:\Utilities\RatRefresh_0.14_test>RatRefresh.exe -debug -refresh 66.123
-min not supplied. Using EDID supplied value of 49
-max not supplied. Using EDID supplied value of 86
Press key to continue.
Going through all Descriptor blocks
*** StoredEDIDValue(54): 112
*** StoredEDIDValue(55): 94
*** StoredEDIDValue(77): 82
*** StoredEDIDValue(78): 70
*** StoredEDIDValue(95): 68
*** StoredEDIDValue(96): 69
*** StoredEDIDValue(113): 49
*** StoredEDIDValue(114): 86
Key SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083\1&8713bca&0&UID0\Device Parameters\EDID_OVERRIDE
WantedRefreshRate 66.123
HexCurrentPixelClock: 5e70
CurrentPixelClock: 24176
HexHorizontalResolution: 0a00
HorizontalResolution: 2560
HexVerticalResolution: 0640
VerticalResolution: 1600
HexVerticalBlankingLines: 002e
VerticalBlankingLines: 46
TotalHorizontalResolution: 2720
TotalVerticalResolution: 1646
CalculatedPixelClock 29604
HexCalculatedPixelClock 73a4
ReversedEdidHexCalculatedPixelClock a473
TotalChecksum 9643
Checksum 85
HexChecksum 55
done
Press key to continue.
--- End code ---
ufotest shows 59.972 Hz
Here's my registry export after this
--- Code: ---Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083\1&8713bca&0&UID0]
"DeviceDesc"="@monitor.inf,%pnpmonitor.devicedesc%;Generic PnP Monitor"
"Capabilities"=dword:000000e4
"Address"=dword:00000000
"ConfigFlags"=dword:00000000
"ContainerID"="{6d5104c6-2815-5319-8110-935b6287b83a}"
"HardwareID"=hex(7):4d,00,4f,00,4e,00,49,00,54,00,4f,00,52,00,5c,00,44,00,45,\
00,4c,00,34,00,30,00,38,00,33,00,00,00,00,00
"CompatibleIDs"=hex(7):2a,00,50,00,4e,00,50,00,30,00,39,00,46,00,46,00,00,00,\
00,00
"ClassGUID"="{4d36e96e-e325-11ce-bfc1-08002be10318}"
"Service"="monitor"
"Driver"="{4d36e96e-e325-11ce-bfc1-08002be10318}\\0005"
"Mfg"="@monitor.inf,%generic%;(Standard monitor types)"
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083\1&8713bca&0&UID0\Device Parameters]
"EDID"=hex:00,ff,ff,ff,ff,ff,ff,00,10,ac,83,40,4c,4e,34,41,10,18,01,03,80,40,\
28,78,ea,1d,f5,ae,4f,35,b3,25,0d,50,54,a5,4b,00,81,00,b3,00,d1,00,71,4f,a9,\
40,81,80,d1,c0,01,01,a4,73,00,a0,a0,40,2e,60,30,20,36,00,81,91,21,00,00,1a,\
00,00,00,ff,00,52,46,35,37,50,34,34,45,41,34,4e,4c,0a,00,00,00,fc,00,44,45,\
4c,4c,20,55,33,30,31,34,0a,20,20,00,00,00,fd,00,31,56,1d,71,1c,00,0a,20,20,\
20,20,20,20,01,55
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083\1&8713bca&0&UID0\Device Parameters\EDID_OVERRIDE]
"0"=hex:00,ff,ff,ff,ff,ff,ff,00,10,ac,83,40,4c,4e,34,41,10,18,01,03,80,40,28,\
78,ea,1d,f5,ae,4f,35,b3,25,0d,50,54,a5,4b,00,81,00,b3,00,d1,00,71,4f,a9,40,\
81,80,d1,c0,01,01,a4,73,00,a0,a0,40,2e,60,30,20,36,00,81,91,21,00,00,1a,00,\
00,00,ff,00,52,46,35,37,50,34,34,45,41,34,4e,4c,0a,00,00,00,fc,00,44,45,4c,\
4c,20,55,33,30,31,34,0a,20,20,00,00,00,fd,00,31,56,1d,71,1c,00,0a,20,20,20,\
20,20,20,01,55
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083\1&8713bca&0&UID0\Device Parameters\WDF]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083\5&67fc0b1&0&UID4353]
"DeviceDesc"="@monitor.inf,%pnpmonitor.devicedesc%;Generic PnP Monitor"
"Capabilities"=dword:000000e4
"Address"=dword:00000111
"ConfigFlags"=dword:00000000
"ContainerID"="{5e53dd27-50e9-533e-b70c-88d73a545c57}"
"HardwareID"=hex(7):4d,00,4f,00,4e,00,49,00,54,00,4f,00,52,00,5c,00,44,00,45,\
00,4c,00,34,00,30,00,38,00,33,00,00,00,00,00
"CompatibleIDs"=hex(7):2a,00,50,00,4e,00,50,00,30,00,39,00,46,00,46,00,00,00,\
00,00
"ClassGUID"="{4d36e96e-e325-11ce-bfc1-08002be10318}"
"Service"="monitor"
"Driver"="{4d36e96e-e325-11ce-bfc1-08002be10318}\\0004"
"Mfg"="@monitor.inf,%generic%;(Standard monitor types)"
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083\5&67fc0b1&0&UID4353\Device Parameters]
"EDID"=hex:00,ff,ff,ff,ff,ff,ff,00,10,ac,83,40,4c,4e,34,41,10,18,01,03,80,40,\
28,78,ea,1d,f5,ae,4f,35,b3,25,0d,50,54,a5,4b,00,81,00,b3,00,d1,00,71,4f,a9,\
40,81,80,d1,c0,01,01,f0,61,00,a0,a0,40,2e,60,30,20,36,00,81,91,21,00,00,1a,\
00,00,00,ff,00,52,46,35,37,50,34,34,45,41,34,4e,4c,0a,00,00,00,fc,00,44,45,\
4c,4c,20,55,33,30,31,34,0a,20,20,00,00,00,fd,00,31,56,1d,71,1c,00,0a,20,20,\
20,20,20,20,01,1b
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083\5&67fc0b1&0&UID4353\Device Parameters\EDID_OVERRIDE]
"0"=hex:00,ff,ff,ff,ff,ff,ff,00,10,ac,83,40,4c,4e,34,41,10,18,01,03,80,40,28,\
78,ea,1d,f5,ae,4f,35,b3,25,0d,50,54,a5,4b,00,81,00,b3,00,d1,00,71,4f,a9,40,\
81,80,d1,c0,01,01,f0,61,00,a0,a0,40,2e,60,30,20,36,00,81,91,21,00,00,1a,00,\
00,00,ff,00,52,46,35,37,50,34,34,45,41,34,4e,4c,0a,00,00,00,fc,00,44,45,4c,\
4c,20,55,33,30,31,34,0a,20,20,00,00,00,fd,00,31,56,1d,71,1c,00,0a,20,20,20,\
20,20,20,01,1b
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083\5&67fc0b1&0&UID4353\Device Parameters\WDF]
--- End code ---
As this didn't work, I went the next route. I deleted both the display adapter and monitor from Device Manager and rebooted.
Here's the registry export after this
--- Code: ---Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083\5&67fc0b1&2&UID4353]
"DeviceDesc"="@monitor.inf,%pnpmonitor.devicedesc%;Generic PnP Monitor"
"Capabilities"=dword:000000e4
"Address"=dword:00000111
"ConfigFlags"=dword:00000000
"ContainerID"="{5e53dd27-50e9-533e-b70c-88d73a545c57}"
"HardwareID"=hex(7):4d,00,4f,00,4e,00,49,00,54,00,4f,00,52,00,5c,00,44,00,45,\
00,4c,00,34,00,30,00,38,00,33,00,00,00,00,00
"CompatibleIDs"=hex(7):2a,00,50,00,4e,00,50,00,30,00,39,00,46,00,46,00,00,00,\
00,00
"ClassGUID"="{4d36e96e-e325-11ce-bfc1-08002be10318}"
"Service"="monitor"
"Driver"="{4d36e96e-e325-11ce-bfc1-08002be10318}\\0001"
"Mfg"="@monitor.inf,%generic%;(Standard monitor types)"
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083\5&67fc0b1&2&UID4353\Device Parameters]
"EDID"=hex:00,ff,ff,ff,ff,ff,ff,00,10,ac,83,40,4c,4e,34,41,10,18,01,03,80,40,\
28,78,ea,1d,f5,ae,4f,35,b3,25,0d,50,54,a5,4b,00,81,00,b3,00,d1,00,71,4f,a9,\
40,81,80,d1,c0,01,01,e2,68,00,a0,a0,40,2e,60,30,20,36,00,81,91,21,00,00,1a,\
00,00,00,ff,00,52,46,35,37,50,34,34,45,41,34,4e,4c,0a,00,00,00,fc,00,44,45,\
4c,4c,20,55,33,30,31,34,0a,20,20,00,00,00,fd,00,31,56,1d,71,1c,00,0a,20,20,\
20,20,20,20,01,22
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083\5&67fc0b1&2&UID4353\Device Parameters\WDF]
--- End code ---
Note that there's no EDID_OVERRID in the export, but when I ran CRU to create the custom entry I see my 59.971 rate is still following me.
I edited the custom entry anyway, closed out and re-opened CRU
Running ratrefresh -setup
--- Code: ---D:\Utilities\RatRefresh_0.14_test>type edid.txt
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083\5&67fc0b1&2&UID4353
D:\Utilities\RatRefresh_0.14_test>RatRefresh.exe -setup
Detected video drivers:
Name: NVIDIA GeForce GTX 780
Device ID: PCI\VEN_10DE&DEV_1004&SUBSYS_84691043&REV_A1\4&80E7924&0&0008
Detected active monitors:
Monitor number: 1
Monitor description: DELL U3014
Serial number: RF57P44EA4NL
Monitor InstanceID: DISPLAY\DEL4083\5&67fc0b1&2&UID4353
Monitor DevicePath:
HorizontalResolution: 2560
VerticalResolution: 1600
Minimum reported refreshrate: 49
Maximum reported refreshrate: 86
What monitor number to use?
1
edid.txt file written.
--- End code ---
--- Code: ---D:\Utilities\RatRefresh_0.14_test>RatRefresh.exe -debug -refresh 59.850 -min 50 -max 75
Going through all Descriptor blocks
*** StoredEDIDValue(54): 239
*** StoredEDIDValue(55): 104
*** StoredEDIDValue(77): 68
*** StoredEDIDValue(78): 69
*** StoredEDIDValue(95): 0
*** StoredEDIDValue(96): 0
*** StoredEDIDValue(113): 0
*** StoredEDIDValue(114): 0
Key SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083\5&67fc0b1&2&UID4353\Device Parameters\EDID_OVERRIDE
WantedRefreshRate 59.850
HexCurrentPixelClock: 68ef
CurrentPixelClock: 26863
HexHorizontalResolution: 0a00
HorizontalResolution: 2560
HexVerticalResolution: 0640
VerticalResolution: 1600
HexVerticalBlankingLines: 002e
VerticalBlankingLines: 46
TotalHorizontalResolution: 2720
TotalVerticalResolution: 1646
CalculatedPixelClock 26796
HexCalculatedPixelClock 68ac
ReversedEdidHexCalculatedPixelClock ac68
TotalChecksum 7733
Checksum 203
HexChecksum cb
done
Press key to continue.
--- End code ---
ufotest shows 59.972 Hz
Here's the registry export after this
--- Code: ---Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083\1&8713bca&0&UID0]
"DeviceDesc"="@monitor.inf,%pnpmonitor.devicedesc%;Generic PnP Monitor"
"Capabilities"=dword:000000e4
"Address"=dword:00000000
"ConfigFlags"=dword:00000000
"ContainerID"="{6d5104c6-2815-5319-8110-935b6287b83a}"
"HardwareID"=hex(7):4d,00,4f,00,4e,00,49,00,54,00,4f,00,52,00,5c,00,44,00,45,\
00,4c,00,34,00,30,00,38,00,33,00,00,00,00,00
"CompatibleIDs"=hex(7):2a,00,50,00,4e,00,50,00,30,00,39,00,46,00,46,00,00,00,\
00,00
"ClassGUID"="{4d36e96e-e325-11ce-bfc1-08002be10318}"
"Service"="monitor"
"Driver"="{4d36e96e-e325-11ce-bfc1-08002be10318}\\0004"
"Mfg"="@monitor.inf,%generic%;(Standard monitor types)"
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083\1&8713bca&0&UID0\Device Parameters]
"EDID"=hex:00,ff,ff,ff,ff,ff,ff,00,10,ac,83,40,4c,4e,34,41,10,18,01,03,80,40,\
28,78,ea,1d,f5,ae,4f,35,b3,25,0d,50,54,a5,4b,00,81,00,b3,00,d1,00,71,4f,a9,\
40,81,80,d1,c0,01,01,e2,68,00,a0,a0,40,2e,60,30,20,36,00,81,91,21,00,00,1a,\
00,00,00,ff,00,52,46,35,37,50,34,34,45,41,34,4e,4c,0a,00,00,00,fc,00,44,45,\
4c,4c,20,55,33,30,31,34,0a,20,20,00,00,00,fd,00,31,56,1d,71,1c,00,0a,20,20,\
20,20,20,20,01,22
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083\1&8713bca&0&UID0\Device Parameters\WDF]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083\5&67fc0b1&2&UID4353]
"DeviceDesc"="@monitor.inf,%pnpmonitor.devicedesc%;Generic PnP Monitor"
"Capabilities"=dword:000000e4
"Address"=dword:00000111
"ConfigFlags"=dword:00000000
"ContainerID"="{5e53dd27-50e9-533e-b70c-88d73a545c57}"
"HardwareID"=hex(7):4d,00,4f,00,4e,00,49,00,54,00,4f,00,52,00,5c,00,44,00,45,\
00,4c,00,34,00,30,00,38,00,33,00,00,00,00,00
"CompatibleIDs"=hex(7):2a,00,50,00,4e,00,50,00,30,00,39,00,46,00,46,00,00,00,\
00,00
"ClassGUID"="{4d36e96e-e325-11ce-bfc1-08002be10318}"
"Service"="monitor"
"Driver"="{4d36e96e-e325-11ce-bfc1-08002be10318}\\0001"
"Mfg"="@monitor.inf,%generic%;(Standard monitor types)"
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083\5&67fc0b1&2&UID4353\Device Parameters]
"EDID"=hex:00,ff,ff,ff,ff,ff,ff,00,10,ac,83,40,4c,4e,34,41,10,18,01,03,80,40,\
28,78,ea,1d,f5,ae,4f,35,b3,25,0d,50,54,25,4b,00,81,00,b3,00,d1,00,71,4f,a9,\
40,81,80,d1,c0,01,01,ac,68,00,a0,a0,40,2e,60,30,20,36,00,80,90,21,00,00,1a,\
00,00,00,fc,00,44,45,4c,4c,20,55,33,30,31,34,0a,20,20,00,00,00,10,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,10,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,01,cb
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083\5&67fc0b1&2&UID4353\Device Parameters\EDID_OVERRIDE]
"0"=hex:00,ff,ff,ff,ff,ff,ff,00,10,ac,83,40,4c,4e,34,41,10,18,01,03,80,40,28,\
78,ea,1d,f5,ae,4f,35,b3,25,0d,50,54,25,4b,00,81,00,b3,00,d1,00,71,4f,a9,40,\
81,80,d1,c0,01,01,ac,68,00,a0,a0,40,2e,60,30,20,36,00,80,90,21,00,00,1a,00,\
00,00,fc,00,44,45,4c,4c,20,55,33,30,31,34,0a,20,20,00,00,00,10,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,10,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,01,cb
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083\5&67fc0b1&2&UID4353\Device Parameters\WDF]
--- End code ---
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083\1&8713bca&0&UID0 has made a return.
At this point I'm going to nuke it from orbit and run DDU at lunch and rip out all display drivers and start fresh.
I could continue to run 0.11 with no issues, so this isn't hurting anything. I'm just glad I can help diagnose this so hopefully we can avoid a similar issue for someone else.
Sorry, I wrote this all up this morning and apparently never hit post. Just checking in on my coffee run.
Rataplan727:
--- Quote ---I could continue to run 0.11 with no issues, so this isn't hurting anything. I'm just glad I can help diagnose this so hopefully we can avoid a similar issue for someone else.
--- End quote ---
And I really appreciate that! Remote support is always a hassle. Unless we use something like Anydesk so I can remote your system, it's going to be 'try this, report that' unfortunately..
EDID_OVERRIDE does not exist by default. It's only needed when you want to use custom resolutions. RatRefresh and CRU just create it when it's not there yet. And since 0.12 you don't actually have to use CRU anymore to set things up. In fact you shouldn't use CRU anymore to set things up, as that creates additional values in the EDID_OVERRIDE key. I'm baffled why it wouldn't work in 0.14. What is in your edid.txt from 0.11? IIRC 0.11 had the path until EDID_OVERRIDE in there, which 0.12+ does not have, it has just the instanceID. But that instance ID should be the same. After all, all RatRefresh and CRU do is put a value 0 with an EDID value with specific timings in there (or 1,2,3 for additional resolutions). It's just a registry value, and thats all these tools do. So then, if 0.11 works, I wonder what's in that edid.txt file.
However, AGAIN you now have 2 EDID_OVERRIDE keys, for ID 1&8713bca&0&UID0 and for 5&67fc0b1&0&UID4353, both with different original EDID values and both different EDID_OVERRIDE values for custom resolution 0. After deleting your display + monitors, only 5&67fc0b1&0&UID4353 seems to be left, so that does seem to be the one to work with. And also that's the ID you have in your edid.txt from 0.11 (from your post from yesterday). But then, after you run RatRefresh 1&8713bca&0&UID0 is back, which probably happens after resetting the device, as the only value RatRefresh writes is '0' with an EDID value in there.
I just can't get over the fact that 0.11 would work and 0.14 doens't. The previously posted registry stuff doesn't add up. So... I want to ask you one more time to do the following:
0.11
- Remove drivers / monitors from Windows and reboot
- Open CRU and add one custom resolution
- Rename devconx64 to something else, so your display won't get reset
- Verify the edid.txt still reflects the ID you now see in your registry, ie the one where CRU put it's info
- Run ratrefresh -debug -file edid.txt -refresh 59.300 (note that debug might require you to hit enter a few times, it might pause in between)
- Screen should NOT reset as devconx is not accesible.
- Post ratrefresh output
- Post edid.txt from version 0.11
- Export registry and post
then for 0.14
- Just to be sure (it's probaby redundant): remove drivers / monitor again and reboot
- Run ratrefresh -setup and choose your monitor
- Run ratrefresh -debug -norestart -refresh 59.300 (note that debug might require you to hit enter a few times, it might pause in between)
- Screen should NOT reset as 0.14 has -norestart
- Post ratrefresh output
- Export registry and post
I will carefully study those outputs. As this way we prevent the display from resetting, whatever is in the registry then with regards to custom resolutions, is what RatRefresh actually wrote. Resetting display might change things, although I haven't seen that happening yet. If the registry values that 0.11 writes are different than 0.14, I have work to do. If they are the same, well then I would not know yet how to proceed.
Thank you so much for your help debugging this :) Which I had a system that didn't work, would help me debug.
trevorp:
0.11
Removing drivers/monitor from Device Manager and rebooting
Registry export
--- Code: ---Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083\5&67fc0b1&4&UID4353]
"DeviceDesc"="@monitor.inf,%pnpmonitor.devicedesc%;Generic PnP Monitor"
"Capabilities"=dword:000000e4
"Address"=dword:00000111
"ConfigFlags"=dword:00000000
"ContainerID"="{5e53dd27-50e9-533e-b70c-88d73a545c57}"
"HardwareID"=hex(7):4d,00,4f,00,4e,00,49,00,54,00,4f,00,52,00,5c,00,44,00,45,\
00,4c,00,34,00,30,00,38,00,33,00,00,00,00,00
"CompatibleIDs"=hex(7):2a,00,50,00,4e,00,50,00,30,00,39,00,46,00,46,00,00,00,\
00,00
"ClassGUID"="{4d36e96e-e325-11ce-bfc1-08002be10318}"
"Service"="monitor"
"Driver"="{4d36e96e-e325-11ce-bfc1-08002be10318}\\0001"
"Mfg"="@monitor.inf,%generic%;(Standard monitor types)"
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083\5&67fc0b1&4&UID4353\Device Parameters]
"EDID"=hex:00,ff,ff,ff,ff,ff,ff,00,10,ac,83,40,4c,4e,34,41,10,18,01,03,80,40,\
28,78,ea,1d,f5,ae,4f,35,b3,25,0d,50,54,a5,4b,00,81,00,b3,00,d1,00,71,4f,a9,\
40,81,80,d1,c0,01,01,e2,68,00,a0,a0,40,2e,60,30,20,36,00,81,91,21,00,00,1a,\
00,00,00,ff,00,52,46,35,37,50,34,34,45,41,34,4e,4c,0a,00,00,00,fc,00,44,45,\
4c,4c,20,55,33,30,31,34,0a,20,20,00,00,00,fd,00,31,56,1d,71,1c,00,0a,20,20,\
20,20,20,20,01,22
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083\5&67fc0b1&4&UID4353\Device Parameters\WDF]
--- End code ---
Setting a custom resolution with CRU
Registry after CRU
--- Code: ---Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083\5&67fc0b1&1&UID4353]
"DeviceDesc"="@monitor.inf,%pnpmonitor.devicedesc%;Generic PnP Monitor"
"Capabilities"=dword:000000e4
"Address"=dword:00000111
"ConfigFlags"=dword:00000000
"ContainerID"="{5e53dd27-50e9-533e-b70c-88d73a545c57}"
"HardwareID"=hex(7):4d,00,4f,00,4e,00,49,00,54,00,4f,00,52,00,5c,00,44,00,45,\
00,4c,00,34,00,30,00,38,00,33,00,00,00,00,00
"CompatibleIDs"=hex(7):2a,00,50,00,4e,00,50,00,30,00,39,00,46,00,46,00,00,00,\
00,00
"ClassGUID"="{4d36e96e-e325-11ce-bfc1-08002be10318}"
"Service"="monitor"
"Driver"="{4d36e96e-e325-11ce-bfc1-08002be10318}\\0001"
"Mfg"="@monitor.inf,%generic%;(Standard monitor types)"
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083\5&67fc0b1&1&UID4353\Device Parameters]
"EDID"=hex:00,ff,ff,ff,ff,ff,ff,00,10,ac,83,40,4c,4e,34,41,10,18,01,03,80,40,\
28,78,ea,1d,f5,ae,4f,35,b3,25,0d,50,54,a5,4b,00,81,00,b3,00,d1,00,71,4f,a9,\
40,81,80,d1,c0,01,01,e2,68,00,a0,a0,40,2e,60,30,20,36,00,81,91,21,00,00,1a,\
00,00,00,ff,00,52,46,35,37,50,34,34,45,41,34,4e,4c,0a,00,00,00,fc,00,44,45,\
4c,4c,20,55,33,30,31,34,0a,20,20,00,00,00,fd,00,31,56,1d,71,1c,00,0a,20,20,\
20,20,20,20,01,22,02,03,25,f1,50,90,05,04,03,02,07,16,01,06,11,12,15,13,14,\
1f,20,23,09,1f,07,67,03,0c,00,10,00,38,38,83,01,00,00,02,3a,80,18,71,38,2d,\
40,58,2c,45,00,81,91,21,00,00,1e,01,1d,80,18,71,1c,16,20,58,2c,25,00,81,91,\
21,00,00,9e,01,1d,00,72,51,d0,1e,20,6e,28,55,00,81,91,21,00,00,1e,8f,0a,d0,\
8a,20,e0,2d,10,10,3e,96,00,81,91,21,00,00,18,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,e8
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083\5&67fc0b1&1&UID4353\Device Parameters\EDID_OVERRIDE]
"0"=hex:00,ff,ff,ff,ff,ff,ff,00,10,ac,83,40,4c,4e,34,41,10,18,01,03,80,40,28,\
78,ea,1d,f5,ae,4f,35,b3,25,0d,50,54,25,4b,00,81,00,b3,00,d1,00,71,4f,a9,40,\
81,80,d1,c0,01,01,71,5e,00,a0,a0,40,2e,60,30,20,36,00,80,90,21,00,00,1a,00,\
00,00,fc,00,44,45,4c,4c,20,55,33,30,31,34,0a,20,20,00,00,00,10,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,10,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,01,10
"CRU_Name"=hex:01,44,45,4c,4c,20,55,33,30,31,34
"CRU_Serial_Number"=hex:00,52,46,35,37,50,34,34,45,41,34,4e,4c
"CRU_Range_Limits"=hex:00,00,31,00,56,00,1d,00,71,01,18
"CRU_Extensions"=hex:01
"1"=hex:02,03,25,70,50,90,05,04,03,02,07,16,01,06,11,12,15,13,14,1f,20,23,09,\
1f,07,67,03,0c,00,10,00,38,38,83,01,00,00,02,3a,80,18,71,38,2d,40,58,2c,45,\
00,e0,0e,11,00,00,1e,01,1d,80,18,71,1c,16,20,58,2c,25,00,e0,87,10,00,00,9e,\
01,1d,00,72,51,d0,1e,20,6e,28,55,00,40,--BINGO! Either that, or I was attempting to say "before" but it was too many letters to type--,10,00,00,1e,8f,0a,d0,8a,20,e0,2d,\
10,10,3e,96,00,--BINGO! Either that, or I was attempting to say "before" but it was too many letters to type--,78,00,00,00,18,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,8f
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083\5&67fc0b1&1&UID4353\Device Parameters\WDF]
--- End code ---
Verifying edid.txt still reflects the ID
--- Code: ---D:\Utilities\RatRefresh>type edid.txt
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083\5&67fc0b1&0&UID4353\Device Parameters\EDID_OVERRIDE\0
--- End code ---
--- Code: ---D:\Utilities\RatRefresh>ratrefresh -debug -edidfile edid.txt -refresh 59.300
Registry value HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083\5&67fc0b1&0&UID4353\Device Parameters\EDID_OVERRIDE\0 could not be read. Wrong key / value?
--- End code ---
At this point I started poking around the registy key with powershell and kept walking back until I realized the device ID was wrong.
I corrected it to what I see in the registry
--- Code: ---D:\Utilities\RatRefresh>type edid.txt
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083\5&67fc0b1&1&UID4353\Device Parameters\EDID_OVERRIDE\0
--- End code ---
The only difference is 5&67fc0b1&0&UID4353 doesn't work, 5&67fc0b1&1&UID4353 does. When I kept restoring my registry backup, it was restoring the &0 display
Ratrefresh output
--- Code: ---D:\Utilities\RatRefresh>ratrefresh -debug -edidfile edid.txt -refresh 59.300
Key HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083\5&67fc0b1&1&UID4353\Device Parameters\EDID_OVERRIDE
Value 0
WantedRefreshRate 59.300
HexCurrentPixelClock 5e71
CurrentPixelClock 24177
HexHorizontalResolution 0a00
HorizontalResolution 2560
HexverticalResolution 0640
VerticalResolution 1600
HexHorizontalBlankingPixels 00a0
HorizontalBlankingPixels 160
HexVerticalBlankingLines 002e
VerticalBlankingLines 46
TotalHorizontalResolution 2720
TotalVerticalResolution 1646
CalculatedPixelClock 26549
HexCalculatedPixelClock 67b5
ReversedEdidHexCalculatedPixelClock b567
TotalChecksum 7741
Checksum 195
HexChecksum c3
--- End code ---
Registry after this command
--- Code: ---Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083\5&67fc0b1&1&UID4353]
"DeviceDesc"="@monitor.inf,%pnpmonitor.devicedesc%;Generic PnP Monitor"
"Capabilities"=dword:000000e4
"Address"=dword:00000111
"ConfigFlags"=dword:00000000
"ContainerID"="{5e53dd27-50e9-533e-b70c-88d73a545c57}"
"HardwareID"=hex(7):4d,00,4f,00,4e,00,49,00,54,00,4f,00,52,00,5c,00,44,00,45,\
00,4c,00,34,00,30,00,38,00,33,00,00,00,00,00
"CompatibleIDs"=hex(7):2a,00,50,00,4e,00,50,00,30,00,39,00,46,00,46,00,00,00,\
00,00
"ClassGUID"="{4d36e96e-e325-11ce-bfc1-08002be10318}"
"Service"="monitor"
"Driver"="{4d36e96e-e325-11ce-bfc1-08002be10318}\\0001"
"Mfg"="@monitor.inf,%generic%;(Standard monitor types)"
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083\5&67fc0b1&1&UID4353\Device Parameters]
"EDID"=hex:00,ff,ff,ff,ff,ff,ff,00,10,ac,83,40,4c,4e,34,41,10,18,01,03,80,40,\
28,78,ea,1d,f5,ae,4f,35,b3,25,0d,50,54,a5,4b,00,81,00,b3,00,d1,00,71,4f,a9,\
40,81,80,d1,c0,01,01,e2,68,00,a0,a0,40,2e,60,30,20,36,00,81,91,21,00,00,1a,\
00,00,00,ff,00,52,46,35,37,50,34,34,45,41,34,4e,4c,0a,00,00,00,fc,00,44,45,\
4c,4c,20,55,33,30,31,34,0a,20,20,00,00,00,fd,00,31,56,1d,71,1c,00,0a,20,20,\
20,20,20,20,01,22,02,03,25,f1,50,90,05,04,03,02,07,16,01,06,11,12,15,13,14,\
1f,20,23,09,1f,07,67,03,0c,00,10,00,38,38,83,01,00,00,02,3a,80,18,71,38,2d,\
40,58,2c,45,00,81,91,21,00,00,1e,01,1d,80,18,71,1c,16,20,58,2c,25,00,81,91,\
21,00,00,9e,01,1d,00,72,51,d0,1e,20,6e,28,55,00,81,91,21,00,00,1e,8f,0a,d0,\
8a,20,e0,2d,10,10,3e,96,00,81,91,21,00,00,18,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,e8
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083\5&67fc0b1&1&UID4353\Device Parameters\EDID_OVERRIDE]
"0"=hex:00,ff,ff,ff,ff,ff,ff,00,10,ac,83,40,4c,4e,34,41,10,18,01,03,80,40,28,\
78,ea,1d,f5,ae,4f,35,b3,25,0d,50,54,25,4b,00,81,00,b3,00,d1,00,71,4f,a9,40,\
81,80,d1,c0,01,01,b5,67,00,a0,a0,40,2e,60,30,20,36,00,80,90,21,00,00,1a,00,\
00,00,fc,00,44,45,4c,4c,20,55,33,30,31,34,0a,20,20,00,00,00,10,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,10,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,01,c3
"CRU_Name"=hex:01,44,45,4c,4c,20,55,33,30,31,34
"CRU_Serial_Number"=hex:00,52,46,35,37,50,34,34,45,41,34,4e,4c
"CRU_Range_Limits"=hex:00,00,31,00,56,00,1d,00,71,01,18
"CRU_Extensions"=hex:01
"1"=hex:02,03,25,70,50,90,05,04,03,02,07,16,01,06,11,12,15,13,14,1f,20,23,09,\
1f,07,67,03,0c,00,10,00,38,38,83,01,00,00,02,3a,80,18,71,38,2d,40,58,2c,45,\
00,e0,0e,11,00,00,1e,01,1d,80,18,71,1c,16,20,58,2c,25,00,e0,87,10,00,00,9e,\
01,1d,00,72,51,d0,1e,20,6e,28,55,00,40,--BINGO! Either that, or I was attempting to say "before" but it was too many letters to type--,10,00,00,1e,8f,0a,d0,8a,20,e0,2d,\
10,10,3e,96,00,--BINGO! Either that, or I was attempting to say "before" but it was too many letters to type--,78,00,00,00,18,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,8f
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083\5&67fc0b1&1&UID4353\Device Parameters\WDF]
--- End code ---
0.14
Removed drivers/mointors
Registry at this stage
--- Code: ---Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083\5&67fc0b1&2&UID4353]
"DeviceDesc"="@monitor.inf,%pnpmonitor.devicedesc%;Generic PnP Monitor"
"Capabilities"=dword:000000e4
"Address"=dword:00000111
"ConfigFlags"=dword:00000000
"ContainerID"="{5e53dd27-50e9-533e-b70c-88d73a545c57}"
"HardwareID"=hex(7):4d,00,4f,00,4e,00,49,00,54,00,4f,00,52,00,5c,00,44,00,45,\
00,4c,00,34,00,30,00,38,00,33,00,00,00,00,00
"CompatibleIDs"=hex(7):2a,00,50,00,4e,00,50,00,30,00,39,00,46,00,46,00,00,00,\
00,00
"ClassGUID"="{4d36e96e-e325-11ce-bfc1-08002be10318}"
"Service"="monitor"
"Driver"="{4d36e96e-e325-11ce-bfc1-08002be10318}\\0001"
"Mfg"="@monitor.inf,%generic%;(Standard monitor types)"
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083\5&67fc0b1&2&UID4353\Device Parameters]
"EDID"=hex:00,ff,ff,ff,ff,ff,ff,00,10,ac,83,40,4c,4e,34,41,10,18,01,03,80,40,\
28,78,ea,1d,f5,ae,4f,35,b3,25,0d,50,54,a5,4b,00,81,00,b3,00,d1,00,71,4f,a9,\
40,81,80,d1,c0,01,01,e2,68,00,a0,a0,40,2e,60,30,20,36,00,81,91,21,00,00,1a,\
00,00,00,ff,00,52,46,35,37,50,34,34,45,41,34,4e,4c,0a,00,00,00,fc,00,44,45,\
4c,4c,20,55,33,30,31,34,0a,20,20,00,00,00,fd,00,31,56,1d,71,1c,00,0a,20,20,\
20,20,20,20,01,22
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083\5&67fc0b1&2&UID4353\Device Parameters\WDF]
--- End code ---
Setting up ratrefresh
--- Code: ---D:\Utilities\RatRefresh_0.14_test>ratrefresh -setup
Detected video drivers:
Name: NVIDIA GeForce GTX 780
Device ID: PCI\VEN_10DE&DEV_1004&SUBSYS_84691043&REV_A1\4&80E7924&0&0008
Detected active monitors:
Monitor number: 1
Monitor description: DELL U3014
Serial number: RF57P44EA4NL
Monitor InstanceID: DISPLAY\DEL4083\5&67fc0b1&2&UID4353
Monitor DevicePath:
HorizontalResolution: 2560
VerticalResolution: 1600
Minimum reported refreshrate: 49
Maximum reported refreshrate: 86
What monitor number to use?
1
edid.txt file written.
--- End code ---
Verifying edid.txt
--- Code: ---D:\Utilities\RatRefresh_0.14_test>type edid.txt
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083\5&67fc0b1&2&UID4353
--- End code ---
--- Code: ---D:\Utilities\RatRefresh_0.14_test>ratrefresh -debug -norestart -refresh 59.300
Registry key SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083\5&67fc0b1&2&UID4353\Device Parameters\EDID_OVERRIDE could not be opened. Trying to create subkey.
Registry value SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083\5&67fc0b1&2&UID4353\ could Not be read. Using the original EDID value.
-min not supplied. Using EDID supplied value of 49
-max not supplied. Using EDID supplied value of 86
Press key to continue.
Going through all Descriptor blocks
*** StoredEDIDValue(54): 226
*** StoredEDIDValue(55): 104
*** StoredEDIDValue(77): 82
*** StoredEDIDValue(78): 70
*** StoredEDIDValue(95): 68
*** StoredEDIDValue(96): 69
*** StoredEDIDValue(113): 49
*** StoredEDIDValue(114): 86
Key SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083\5&67fc0b1&2&UID4353\Device Parameters\EDID_OVERRIDE
WantedRefreshRate 59.300
HexCurrentPixelClock: 68e2
CurrentPixelClock: 26850
HexHorizontalResolution: 0a00
HorizontalResolution: 2560
HexVerticalResolution: 0640
VerticalResolution: 1600
HexVerticalBlankingLines: 002e
VerticalBlankingLines: 46
TotalHorizontalResolution: 2720
TotalVerticalResolution: 1646
CalculatedPixelClock 26549
HexCalculatedPixelClock 67b5
ReversedEdidHexCalculatedPixelClock b567
TotalChecksum 9648
Checksum 80
HexChecksum 50
-norestart supplied, Not restarting video driver.
done
Press key to continue.
--- End code ---
Registry
--- Code: ---Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083\5&67fc0b1&2&UID4353]
"DeviceDesc"="@monitor.inf,%pnpmonitor.devicedesc%;Generic PnP Monitor"
"Capabilities"=dword:000000e4
"Address"=dword:00000111
"ConfigFlags"=dword:00000000
"ContainerID"="{5e53dd27-50e9-533e-b70c-88d73a545c57}"
"HardwareID"=hex(7):4d,00,4f,00,4e,00,49,00,54,00,4f,00,52,00,5c,00,44,00,45,\
00,4c,00,34,00,30,00,38,00,33,00,00,00,00,00
"CompatibleIDs"=hex(7):2a,00,50,00,4e,00,50,00,30,00,39,00,46,00,46,00,00,00,\
00,00
"ClassGUID"="{4d36e96e-e325-11ce-bfc1-08002be10318}"
"Service"="monitor"
"Driver"="{4d36e96e-e325-11ce-bfc1-08002be10318}\\0001"
"Mfg"="@monitor.inf,%generic%;(Standard monitor types)"
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083\5&67fc0b1&2&UID4353\Device Parameters]
"EDID"=hex:00,ff,ff,ff,ff,ff,ff,00,10,ac,83,40,4c,4e,34,41,10,18,01,03,80,40,\
28,78,ea,1d,f5,ae,4f,35,b3,25,0d,50,54,a5,4b,00,81,00,b3,00,d1,00,71,4f,a9,\
40,81,80,d1,c0,01,01,e2,68,00,a0,a0,40,2e,60,30,20,36,00,81,91,21,00,00,1a,\
00,00,00,ff,00,52,46,35,37,50,34,34,45,41,34,4e,4c,0a,00,00,00,fc,00,44,45,\
4c,4c,20,55,33,30,31,34,0a,20,20,00,00,00,fd,00,31,56,1d,71,1c,00,0a,20,20,\
20,20,20,20,01,22
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083\5&67fc0b1&2&UID4353\Device Parameters\EDID_OVERRIDE]
"0"=hex:00,ff,ff,ff,ff,ff,ff,00,10,ac,83,40,4c,4e,34,41,10,18,01,03,80,40,28,\
78,ea,1d,f5,ae,4f,35,b3,25,0d,50,54,a5,4b,00,81,00,b3,00,d1,00,71,4f,a9,40,\
81,80,d1,c0,01,01,b5,67,00,a0,a0,40,2e,60,30,20,36,00,81,91,21,00,00,1a,00,\
00,00,ff,00,52,46,35,37,50,34,34,45,41,34,4e,4c,0a,00,00,00,fc,00,44,45,4c,\
4c,20,55,33,30,31,34,0a,20,20,00,00,00,fd,00,31,56,1d,71,1c,00,0a,20,20,20,\
20,20,20,01,50
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083\5&67fc0b1&2&UID4353\Device Parameters\WDF]
--- End code ---
It's worth noting that after I did all this, I went back, renamed devcon64.exe back, and tried 0.11. Initially it wouldn't work with the device ID from the prior run, I had to edit it back and change the 1 to a 0 again. It set the refresh rate to the same 59.972.
I deleted the display and monitor from Device Manager again, re-ran CRU, again, the device ID changed to 5&67fc0b1&3&UID4353 but at least ufotest shows the requested rate again.
Here's the registry after I got 0.11 working again without doing a restore from my registry backup
--- Code: ---Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083\1&8713bca&0&UID0]
"DeviceDesc"="@monitor.inf,%pnpmonitor.devicedesc%;Generic PnP Monitor"
"Capabilities"=dword:000000e4
"Address"=dword:00000000
"ConfigFlags"=dword:00000000
"ContainerID"="{6d5104c6-2815-5319-8110-935b6287b83a}"
"HardwareID"=hex(7):4d,00,4f,00,4e,00,49,00,54,00,4f,00,52,00,5c,00,44,00,45,\
00,4c,00,34,00,30,00,38,00,33,00,00,00,00,00
"CompatibleIDs"=hex(7):2a,00,50,00,4e,00,50,00,30,00,39,00,46,00,46,00,00,00,\
00,00
"ClassGUID"="{4d36e96e-e325-11ce-bfc1-08002be10318}"
"Service"="monitor"
"Driver"="{4d36e96e-e325-11ce-bfc1-08002be10318}\\0004"
"Mfg"="@monitor.inf,%generic%;(Standard monitor types)"
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083\1&8713bca&0&UID0\Device Parameters]
"EDID"=hex:00,ff,ff,ff,ff,ff,ff,00,10,ac,83,40,4c,4e,34,41,10,18,01,03,80,40,\
28,78,ea,1d,f5,ae,4f,35,b3,25,0d,50,54,a5,4b,00,81,00,b3,00,d1,00,71,4f,a9,\
40,81,80,d1,c0,01,01,e2,68,00,a0,a0,40,2e,60,30,20,36,00,81,91,21,00,00,1a,\
00,00,00,ff,00,52,46,35,37,50,34,34,45,41,34,4e,4c,0a,00,00,00,fc,00,44,45,\
4c,4c,20,55,33,30,31,34,0a,20,20,00,00,00,fd,00,31,56,1d,71,1c,00,0a,20,20,\
20,20,20,20,01,22
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083\1&8713bca&0&UID0\Device Parameters\WDF]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083\5&67fc0b1&3&UID4353]
"DeviceDesc"="@monitor.inf,%pnpmonitor.devicedesc%;Generic PnP Monitor"
"Capabilities"=dword:000000e4
"Address"=dword:00000111
"ConfigFlags"=dword:00000000
"ContainerID"="{5e53dd27-50e9-533e-b70c-88d73a545c57}"
"HardwareID"=hex(7):4d,00,4f,00,4e,00,49,00,54,00,4f,00,52,00,5c,00,44,00,45,\
00,4c,00,34,00,30,00,38,00,33,00,00,00,00,00
"CompatibleIDs"=hex(7):2a,00,50,00,4e,00,50,00,30,00,39,00,46,00,46,00,00,00,\
00,00
"ClassGUID"="{4d36e96e-e325-11ce-bfc1-08002be10318}"
"Service"="monitor"
"Driver"="{4d36e96e-e325-11ce-bfc1-08002be10318}\\0001"
"Mfg"="@monitor.inf,%generic%;(Standard monitor types)"
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083\5&67fc0b1&3&UID4353\Device Parameters]
"EDID"=hex:00,ff,ff,ff,ff,ff,ff,00,10,ac,83,40,4c,4e,34,41,10,18,01,03,80,40,\
28,78,ea,1d,f5,ae,4f,35,b3,25,0d,50,54,25,4b,00,81,00,b3,00,d1,00,71,4f,a9,\
40,81,80,d1,c0,01,01,b5,67,00,a0,a0,40,2e,60,30,20,36,00,80,90,21,00,00,1a,\
00,00,00,fc,00,44,45,4c,4c,20,55,33,30,31,34,0a,20,20,00,00,00,10,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,10,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,01,c3
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083\5&67fc0b1&3&UID4353\Device Parameters\EDID_OVERRIDE]
"0"=hex:00,ff,ff,ff,ff,ff,ff,00,10,ac,83,40,4c,4e,34,41,10,18,01,03,80,40,28,\
78,ea,1d,f5,ae,4f,35,b3,25,0d,50,54,25,4b,00,81,00,b3,00,d1,00,71,4f,a9,40,\
81,80,d1,c0,01,01,b5,67,00,a0,a0,40,2e,60,30,20,36,00,80,90,21,00,00,1a,00,\
00,00,fc,00,44,45,4c,4c,20,55,33,30,31,34,0a,20,20,00,00,00,10,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,10,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,01,c3
"CRU_Name"=hex:01,44,45,4c,4c,20,55,33,30,31,34
"CRU_Serial_Number"=hex:00,52,46,35,37,50,34,34,45,41,34,4e,4c
"CRU_Range_Limits"=hex:00,00,31,00,56,00,1d,00,71,01,18
"CRU_Extensions"=hex:01
"1"=hex:02,03,25,70,50,90,05,04,03,02,07,16,01,06,11,12,15,13,14,1f,20,23,09,\
1f,07,67,03,0c,00,10,00,38,38,83,01,00,00,02,3a,80,18,71,38,2d,40,58,2c,45,\
00,e0,0e,11,00,00,1e,01,1d,80,18,71,1c,16,20,58,2c,25,00,e0,87,10,00,00,9e,\
01,1d,00,72,51,d0,1e,20,6e,28,55,00,40,--BINGO! Either that, or I was attempting to say "before" but it was too many letters to type--,10,00,00,1e,8f,0a,d0,8a,20,e0,2d,\
10,10,3e,96,00,--BINGO! Either that, or I was attempting to say "before" but it was too many letters to type--,78,00,00,00,18,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,8f
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY\DEL4083\5&67fc0b1&3&UID4353\Device Parameters\WDF]
--- End code ---
Rataplan727:
'Good' news: I have the same issue myself now. And that happened after using CRU 1.5.2. So that'll help debugging. I can't even get it back working with 0.11 after that. Will investigate and post an update.
trevorp:
Glad you can recreate the issue, sorry it's hosed up your install now.
I can definitely get 0.11 back to working after deleting the monitor and display adapters, and rebooting. I have noticed if you're not quick enough with the reboot, windows starts detecting stuff automatically and I'm pretty sure that's how I had my display numbers walking from 0 to 1 to 2 to 3.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version