I apologize for what is probably a simple question. I have a cps2 setup I recently acquired. I put in all new buttons and joystcks. I decided to get a new jamma harness and new kick harness since the old one was a mess of splices and solder. So the new jamma harness has a nice daisy chain for the ground and I was able to ground all the joystics and buttons with it. My question is, what do I do with the ground wires on the kick harness? ignore them? attach them to the existing ground daisy chain loop? or should I only use the jamma ground for the punch buttons and joysticks, and then create a separate ground daisy chain for the kick harness buttons? I appreciate any insite, I would like to do this correctly and safely if possible.
As an aside, what is considered bast practice regarding "extra" wires on the jamma harness? mine has additional wires for buttons 4 and 5 on player one and 2 sides. cut them off? Leave them dangling? Thank you.