Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Problem Loading Atari emu with MAME wrapper  (Read 4135 times)

0 Members and 1 Guest are viewing this topic.

ChipBuffalo

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 6
  • Last login:December 11, 2016, 02:50:00 pm
  • I want to build my own arcade controls!
Problem Loading Atari emu with MAME wrapper
« on: November 25, 2016, 11:03:57 pm »
So looking at the arcade setup doc's, it shows that Atari 2600/5200/7800 are to use MAME as the "wrapper". I can not get it to work and was wondering if there is some instruction out there that I can't find to help me get it working:

Attached are the 2 screen shots. 1st is the clip from the setup doc, 2nd is my setup on MA.

Any help would be greatly appreciated.

CB

Sandman71

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 16
  • Last login:October 03, 2022, 10:33:08 am
  • All wife wanted was Outrun.
Re: Problem Loading Atari emu with MAME wrapper
« Reply #1 on: February 18, 2018, 04:23:35 pm »
Just wondering, ever get any to work in Maximus?  I have 7800 working fine in MESS but I get past the "initializing" screen in Maximus and just displays the Atari logo.  Won't get to the game.

Thanks

Sandy