Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news


  

Author Topic: megatouch rx keeps rebooting after cmos battery died  (Read 769 times)

0 Members and 1 Guest are viewing this topic.

gmtransman2

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 6
  • I want to build my own arcade controls!
megatouch rx keeps rebooting after cmos battery died
« on: November 22, 2016, 09:01:28 pm »
rx with a intel mb in it the cmos battery died replaced battery now just keeps rebooting. have reset date time and loaded defalts, saved before i exit cmos. replaced hard drive same thing. any ideas thanks

mahkeymike

  • Trade Count: (0)
  • Full Member
  • ***
  • Online Online
  • Posts: 492
Re: megatouch rx keeps rebooting after cmos battery died
« Reply #1 on: November 22, 2016, 09:16:04 pm »
Where does it reboot and is there any error on the screen before it reboots? Reason being, if your IOboard isnt being detected it will cause a reboot loop. Any hardware change or failure will cause a reboot loop. If you replaced the hard drive, that would rule out corrupt data.

gmtransman2

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 6
  • I want to build my own arcade controls!
Re: megatouch rx keeps rebooting after cmos battery died
« Reply #2 on: November 22, 2016, 10:23:27 pm »
it has no red failed  all green ok it goes all the way up to localhost login than reboots

gmtransman2

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 6
  • I want to build my own arcade controls!
Re: megatouch rx keeps rebooting after cmos battery died
« Reply #3 on: November 26, 2016, 08:27:29 pm »
last thing is says is
usb 2-1: usbsf:   interface 0 claimed by usbtouchscreen while 'twdriver' sets config #1
than reboots and reboots???

lilshawn

  • Moderator
  • Trade Count: (+3)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 5798
  • I break stuff...then fix it...sometimes
Re: megatouch rx keeps rebooting after cmos battery died
« Reply #4 on: November 29, 2016, 06:04:50 pm »
try going into the bios and loading the default configuration. sometimes something gets enabled or disabled in the bios that throws things into a boot loop.

double check that the computer is set to turn on after an AC power loss.

gmtransman2

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 6
  • I want to build my own arcade controls!
Re: megatouch rx keeps rebooting after cmos battery died
« Reply #5 on: January 16, 2017, 04:35:18 pm »
i got it going dip switch #6 on instead of #3, third from the right instead of the left. thanks all for the help.

  
 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31