Main > Lightguns
Aimtrak Light Gun Recoil Issues - Please Help!!
dgrace:
I tested the power supply round connector with the testing meter and it looks like I had at least 36v. Then I plugged in the gun and power supply and tested the white and black wires for the 36V and it looked like I had power. So, i'm not sure what to do at this point. I've tried recalibrating, plugging in and unplugging everything multiple times. I have the most current firmware. I am still stuck and out of ideas. Help please! See video link below for more info.
https://www.youtube.com/watch?v=98K75ca_W8I&feature=youtu.be
Titchgamer:
I think you should only have the 36V on the noid when its supposed to be pulling in?
Sorry not sure what else to suggest on this one.
rickyjoe:
Hello
First of all, sorry for my English, I am French (thanks Google Translate!).
Dgrace, I think I encounter the same problem as you.
I bought the recoil kit Aimtrak as well as the same power supply that was advised on the manual to upgrader my gun bought from the same shop in 2011 (my firmware is 9.17)
At home also, the recoil does not work correctly: when I plug it and I shoot for the first time it works :) against the second attempt nothing happens ...
If I wait a few minutes and I start again, the first shot works but the following not.
I think the problem could come from the power supply, may be a problem with the amperage (3A may be not enough) because it looks like the power "tires" after the first shot and that " It needs to be recharged to re-run.
I sent an email to Andy of Ultimark in case he's already encountered this worry.
I'll let you know if I'm making any progress ;)
Navigation
[0] Message Index
[*] Previous page
Go to full version