| Arcade Collecting > Restorations & repair |
| Lethal Enforcers 2. My first restoration project. |
| (1/3) > >> |
| Scassidy24:
Taking the plunge! After building my own mame cab from scratch I'm ready to wet my beak on a real machine. Had to have this Lethal Enforcers cabinet. I haven't had a chance to look inside yet but right off the bat I know it deserves new side art, new plexi glass, not sure if the viewing area was originally plexi? Or actually glass? The CP plexi needs replacing. Lots of cigarette burns and it's a busted up. I'll have a few questions later when I get a closer look at the cab and more detailed pics to come First question: the FAQ in artwork has links to resources for side art but those are no more. Anybody know where I could find some side art for this cabinet? Sent from my iPhone using Tapatalk |
| Scassidy24:
Pcb hanging by a thread The control panel has clamps beneath but somebody took the liberty of screwing it on Maybe they were afraid to reach past the tube to get to the clamps Not sure what this was for. Behind the pcb foil side facing away from the pcb This is dead no power to anything but the monitor Sent from my iPhone using Tapatalk |
| mourix:
That's an awesome first restoration cab you've got there 8) It seems like reproduction side art for this one is not available (yet). Your only hopes for now are touching up the original art or looking out for NOS replacements. The power supply you can just order on Happcontrols. Good luck! |
| Titchgamer:
Ile look forward to seeing you get that back up and running :) |
| Scassidy24:
--- Quote from: Titchgamer on October 14, 2016, 07:45:19 am ---Ile look forward to seeing you get that back up and running :) --- End quote --- New power supply installed. Unfortunately it didn't have the wiring or harness for the power switch/lighting circuit however.... Also I realized today that the instruction card got lost on the drive home :angry: I didn't notice it was missing until I played the game today I cleaned out the inside of the cabinet and secured the remaining 3 mounts for the pcb as well |
| Navigation |
| Message Index |
| Next page |