Main > Raspberry Pi & Dev Board

Raspberry Pi RetroPie - Single Mame Rom Boot for Dedicated Vertical Display

<< < (5/10) > >>

thestobbster:
macattack said in an earlier post for this thread that the image does work on his Pi 3.

You may have to tweak the config.txt to match the CPU speed which an example of the Pi2 settings that are also shown in this thread.

If you try it out and it does work please post a reply to this thread.

IamRoger:
I tried out your image, both on RP2 and RP3, both took at least 15 mins to load.  I then changed the config.txt on the RP3 to match speed, still took 15 minutes to load.  Im not sure what the issue is with the image, hmm. It looks great, good job, its too bad I can't get it to work either.

langlem:
Nice image!... A few questions;

1. How did you get it to boot directly into a game. I am failing at this ;D

2. What layout are you using?  I like its simplicity...

Thank you!

EDIT...just found your post on this a few pages back.  Oops

Would you be willing to share your layout/theme?  Thx again!

IamRoger:
TheStobbster, I just want to thank you for your videos and all the info you have shared.  Although I haven't been able to get your image to work properly , I have been recreate the same setup from scratch using a RP3 and Floobs. I have one question:  Where is the setting or in the menu to be able to exit a game by pushing play 1 & 2 button or (keyboard 5 & 6) at the same time?  I have not been able to find the spot to exit or anything referenced to the ESC key to change. I look all through attract mode menu and Mame menu settings.  I still have to use the ESC key to exit a mame game.

mahuti:

--- Quote ---I still have to use the ESC key to exit a mame game.
--- End quote ---

Using the tab key in Mame, you can adjust the UI controls to use a different key other than ESC. To be specific I believe this is what you need to do:

1. start a game in mame
2. hit "tab" key to edit config settings
3. select "Input (general)" in the menu list.
4. select the "UI Cancel" option and hit whatever key or keys you want to use to escape.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version