Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news


  

Author Topic: Upright Cabinet Project HYPERSPACE Codename (Overdue) ,6/12 Sideart Installed!  (Read 5327 times)

0 Members and 1 Guest are viewing this topic.

wp34

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3694
  • 8 Bit...16 Shy
Re: Upright Cabinet Project Codename (Overdue) , 10/31 Halloween update...
« Reply #40 on: October 31, 2016, 08:47:59 pm »
That bezel looks like it fits real nice. Great to see you making progress.   :cheers:

Vincefaro

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 132
  • I want to build my own arcade controls!
Re: Upright Cabinet Project Codename (Overdue) ,6/12 Sideart Installed.
« Reply #41 on: November 07, 2016, 01:14:48 pm »
So I started painting this weekend , the base was was and looks good. The inside is well , not that good, but I guess it will never be seen , I did a lot of prep work on the inside too and it just didn't come out that great. I will do at least two coats inside, and then paint it black. If I had to grade myslef, I would give it a C+, but I am moving forward. I will continue to paint this week and will give special attention to the sides and front which are very clean as far as prep.





« Last Edit: June 12, 2017, 01:46:31 pm by Vincefaro »

Vincefaro

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 132
  • I want to build my own arcade controls!
Re: Upright Cabinet Project Codename (Overdue) ,11/7 Paint started...
« Reply #42 on: November 14, 2016, 04:15:13 pm »
I started painting black inside. We will see how this goes. The first coat well, is not looking great but we will see after the second coat. I will sand in between coats .








« Last Edit: November 15, 2016, 01:41:40 pm by Vincefaro »

Vincefaro

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 132
  • I want to build my own arcade controls!
Re: Upright Cabinet Project Codename (Overdue) ,11/7 Paint started...
« Reply #43 on: November 16, 2016, 01:09:40 pm »
I sanded the cabinet this morning , boy Im getting tired of paintwork. But I used 1000 sandpaper and wetsanded the front of the cabinet , its working great supersmooth .

So, I have been messing with the control panel artwork. This is still WORK IN PROGRESS, but i thought I would share it .I am a left handed player so i thought i would make player 1 with left handed controls. 


« Last Edit: November 17, 2016, 01:23:14 pm by Vincefaro »

Vincefaro

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 132
  • I want to build my own arcade controls!
I installed some LEDS underneath the cabinet and in the Control Panel . It is looking pretty  cool.





https://youtu.be/3VcZ9kWm4U4
« Last Edit: January 06, 2017, 04:27:27 pm by Vincefaro »

leapinlew

  • Some questionable things going on in this room with cheetos
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6544
This has been a fun build to watch. It's some nice work. I'd still probably laminate the outside of the cabinet (I hate prepping and painting).

I totally agree about making the cabinet for yourself and since you are left handed... well, now I have a question. Do you normally play cross handed?



The life of a lefty. Brutal. I built a cabinet with my nephew who was left handed. Some tools were just plain dangerous for him to use and watching him try to use scissors was painful.

wp34

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3694
  • 8 Bit...16 Shy
I have a friend who has a 4-player pedestal and player 1 is left handed.  As far as I know it hasn't caused any issues.

 :pics

Vincefaro

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 132
  • I want to build my own arcade controls!
Yeah as a lefty I just learned to play right handed on the games that only had the right hand version. I am going with player one being left handed.

Vincefaro

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 132
  • I want to build my own arcade controls!
Yeah as a lefty I just learned to play right handed on the games that only had the right hand version. I am going with player one being left handed.
This was just delivered . yippee . Now I have to figure out how to get it working with my system .



Sent from my iPhone using Tapatalk

Vincefaro

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 132
  • I want to build my own arcade controls!
A few more pics of the new screen . I am still trying to work out , How I am installing the Speaker panel so that I can remove it , as I see already that I will need to replace the speaker cloth after a few years or maybe even sooner.I am also trying figure out what is the best way to install the marquee monitor. I am trying magnets for the black piece below the marquee it seems to work pretty well. The speakers are another story. I am still messing with them.





yamatetsu

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1587
  • Just because.
I am still trying to work out , How I am installing the Speaker panel so that I can remove it , as I see already that I will need to replace the speaker cloth after a few years or maybe even sooner.

You can use velcro to secure it to some battens. Later on you can just push it out if you can get at it from the inside of the cab or pull it out from the outside.
                  

Vincefaro

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 132
  • I want to build my own arcade controls!
Im going with magnets , It is working well.




https://www.youtube.com/watch?v=biuUSFr4NdY&feature=youtu.be

wp34

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3694
  • 8 Bit...16 Shy
Does the HD4350 card work properly with your CPU?  I have the same model Lenovo as you and cannot get it to boot with an HD5450.  The card works in other computers so I think it is a Lenovo issue. 

Vincefaro

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 132
  • I want to build my own arcade controls!
Does the HD4350 card work properly with your CPU?  I have the same model Lenovo as you and cannot get it to boot with an HD5450.  The card works in other computers so I think it is a Lenovo issue.


I'm using the 4550 Card and it works great .

wp34

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3694
  • 8 Bit...16 Shy
Does the HD4350 card work properly with your CPU?  I have the same model Lenovo as you and cannot get it to boot with an HD5450.  The card works in other computers so I think it is a Lenovo issue.


I'm using the 4550 Card and it works great .

Awesome.  Thanks!   :cheers:

Vincefaro

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 132
  • I want to build my own arcade controls!
Third coat on the sides . Still needs at least one more . As you know black shows every imperfection , I just need to let it go though . I wetsanded the last coat with 2000 . It seems to be working but I really don't know what I'm
Doing . Can I borrow some laminate ?


Sent from my iPhone using Tapatalk

wp34

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3694
  • 8 Bit...16 Shy
Third coat on the sides . Still needs at least one more . As you know black shows every imperfection , I just need to let it go though.


Sent from my iPhone using Tapatalk

Looking good.  You are so right about letting it go though.  I have the same problem when I paint.

Vincefaro

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 132
  • I want to build my own arcade controls!
Re: Upright Cabinet Project HYPERSPACE Codename (Overdue) ,2/2 LED Marquee In!
« Reply #57 on: February 23, 2017, 01:32:21 pm »
So , I added the LCD Marquee to the cabinet and put the CRT in to see if they work together , After a few hours trying to get Hypermarquee to work on the 26 LCD monitor and Hyperspin on the CRT and staying there after several restarts, it is working. However, when I select a mame game from Hyperspin, The game moves to the LCD marquee and does not play on the CRT. Bummer. I need to figure this out. The games will play form Daphne, and other emulators, but not groovymame. Huh.


https://www.youtube.com/watch?v=PXJEKIQ_qyM

kegga

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 19
Re: Upright Cabinet Project HYPERSPACE Codename (Overdue) ,2/2 LED Marquee In!
« Reply #58 on: February 24, 2017, 08:21:58 am »
Can you post the info of the LCD you are using?

Ian

  • Trade Count: (0)
  • Full Member
  • ***
  • Online Online
  • Posts: 478
  • "A day without Laughter is a day wasted"
Third coat on the sides . Still needs at least one more . As you know black shows every imperfection , I just need to let it go though . I wetsanded the last coat with 2000 . It seems to be working but I really don't know what I'm
Doing . Can I borrow some laminate ?


Sent from my iPhone using Tapatalk

It's actually the Sheen of the paint that shows or hides imperfections. The more shine, the more imperfections arrise. Take a pic of the paint you used... I work in the paint industry and am curious about why it needs 3-coats, and I can give you some pointers so this part of your journey next time is way smoother.

Ian

Every normal man must be tempted at times to spit on his hands, hoist the black flag, and begin to slit throats.

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2080
  • If you don't try, you have no chance at innovation
Re: Upright Cabinet Project HYPERSPACE Codename (Overdue) ,2/2 LED Marquee In!
« Reply #60 on: February 24, 2017, 05:02:29 pm »
Those smart strips suck ass, the sensor goes out rendering them useless and the adjustment knob gets stripped.  Beware.
   

2016 Texas Pinball Festival - Best Arcade In Show - MKX

Vincefaro

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 132
  • I want to build my own arcade controls!
Re: Upright Cabinet Project HYPERSPACE Codename (Overdue) ,2/2 LED Marquee In!
« Reply #61 on: February 24, 2017, 07:02:40 pm »
uh ooh . What sensor?

Those smart strips suck ass, the sensor goes out rendering them useless and the adjustment knob gets stripped.  Beware.

Vincefaro

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 132
  • I want to build my own arcade controls!
Well, It has been 6 months and I finally sent the sent my artwork to be printed . I was holding it back just because I was not sure If I really liked it .  Well, I like it enough to finish the project , It has been long enough. Its time to finish this box! I have to say I am pretty happy with the sideart . The last part that I need to finish is the most important part the control panel. I have the artwork for it but I want to do a clear plexi top So I need to have that made which I will be done in the next two weeks. Then This thing will be finished. Another delay has been dealing with my LCD Marquee and running Groovymame . I have been trying to get this to work well for months . I have since given up on the "correct" way to run Mame with the LCD Marquee, and I am just running Hypermarquee with EDS and Hyperspin. It seems to work well with most games so I am going with it.







My Dad and I installing the sideart.












Last and most important piece still needs to be completed.


« Last Edit: June 12, 2017, 02:40:54 pm by Vincefaro »

wp34

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3694
  • 8 Bit...16 Shy
That turned out nice.   :applaud:

Were you nervous applying the side-art? 

I've been stuck in about the same spot with GroovyMame and my 2nd monitor for a couple of years.  Getting ready to take another run at it soon.

Vincefaro

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 132
  • I want to build my own arcade controls!
Thanks Tim. I was very nervous That is why I didn't do it alone.  I will say it went very well . The rapid tac worked wonders with removing bubbles . If you need any help with the 2nd monitor , I will offer what I know about the subject which is well not that much.


 

wp34

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3694
  • 8 Bit...16 Shy
I would have been nervous which is why I asked.   ;D

I'll PM you if I get stuck again on the 2nd monitor.  I'm 99% certain my main issue is that the 2nd monitor is USB and not HDMI or VGA.

It is great to see you making progress.  It inspires me to get off my butt and finish my project.   :cheers:

  
 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31