| Arcade Collecting > Restorations & repair |
| MORTAL KOMBAT!!!!!!!!!! TWOOOOOOO!!!!! |
| << < (2/11) > >> |
| Cobolisdead:
Well, I finally ordered a cable to connect main sound card to my PCB. It took forever to find one on ebay, so I am glad that it is on its way. When it gets here, I will swap out the switching power supply and hook up the sound board and the Main PCB and see where that leaves me. |
| DeLuSioNal29:
I needed to replace mine on my Smash TV and Bob Roberts made one to order. Works great. Just thought that it could be an option for you if the one on ebay doesn't work or something. DeL |
| Cobolisdead:
So I have swapped out the switching power supply and installed the pubs. I tweaked the monitor, and replaced the battery. Once I hooked up the control panel it fired right up! No sound so I guess that I didn't hook up the power to the sound board. |
| Cobolisdead:
And now what everyone has been waiting for, PICS! After adjusting the screen: The Sound Board. That camera flash makes the light look like it is on, but it is not: The Main board and new Switching power supply. I will clean this up once it is all working: Lots of Wires! Anyone see the power cable for the sound board in there? I can't imagine that they take it out and leave everything else! |
| Malenko:
sound board gets power from the connector on the main boards. You'll also need a volume pot. |
| Navigation |
| Message Index |
| Next page |
| Previous page |