So one of my dreams is to build some bartops with original games pcb , so far i started with ms pacman, but i did not wanted to use an old monitor so instead i was trying to figure out if cga to vga converters where any good, so i found lots of opinions and i decided to give it a go myslef so heres a review.
Since im not a big pixel by pixel fan , as what i really enjoy when i was a kid was the game itself, i really dont care if the game looks original, or with any type of filters, what i really need is just the image to display on the monitor , and this cga to vga converter does the trick,
http://www.ebay.com/itm/351493652707?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AITI am using it on a real ms pacman pcb with a dc arcade power supply, i had to rewire a jamma harness to be able to use it and everything came up good. Colors look good, no lags that i can tell, so far so good, it does require some twiking to be able to work ok but bothhing mayor. So if anyone wants any more feedback on this ill be more than glad to provide it. One thing i found before buying was that there are 2 types of converters but this one its the one that works better. I have another on the way to test on a mr.do and o a yiear kung fuu board. I dont even know if the boards are any good but i bought them from the same guy i bought the ms pacman and the pac was working so i just asume that they will work, the mr do has a blown cap so i will have to replace that first. Anyway let me know what you guys thiink.