Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Rowe Juke Left Channel Full On  (Read 1522 times)

0 Members and 1 Guest are viewing this topic.

Wrubel

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 4
  • Last login:May 01, 2016, 11:32:04 pm
  • I want to build my own arcade controls!
Rowe Juke Left Channel Full On
« on: April 18, 2016, 01:43:20 pm »
I just picked up a cd-100a Rowe Juke box. It was hooked up to external speakers where it was at. I hooked up the internals and the right channel works fine and is controlled by the volume switch ok. The left channel stays full on and is not controlled by the volume at all.

Has anyone seen this before and/or could help?

Wrubel

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 4
  • Last login:May 01, 2016, 11:32:04 pm
  • I want to build my own arcade controls!
Re: Rowe Juke Left Channel Full On
« Reply #1 on: April 20, 2016, 10:36:24 pm »
Thanks you for all who viewed this thread. I found the answer after tweaking my search criteria a few times.

I found the answer here:

http://forum.arcadecontrols.com/index.php?topic=130538.0

I had already found out about the e1 and e7 connections, but I did not have a jumper in the jumper volume section.