Arcade Collecting > Merit/JVL Touchscreen

force radion

<< < (2/2)

lilshawn:
anything really... I use whatever i happen to have.

I tend to gravitate towards the silicone based compounds, they are not conductive and tend to resist drying out.

I'm currently using this:

http://www.rpelectronics.com/860-150g-silicone-heat-sink-compound-mg-chemicals.html

mainly because over the course of a year i'll do thermal compound on literally 100's of FETs, regulators, CPU's, GPU's, etc. so i buy in bulk.

from cheapest to best most expensive compound out there performce is really nil.  so really, whatever you got...use.

otsep:

--- Quote from: lilshawn on June 09, 2016, 04:34:15 pm ---anything really... I use whatever i happen to have.

I tend to gravitate towards the silicone based compounds, they are not conductive and tend to resist drying out.

I'm currently using this:

http://www.rpelectronics.com/860-150g-silicone-heat-sink-compound-mg-chemicals.html

mainly because over the course of a year i'll do thermal compound on literally 100's of FETs, regulators, CPU's, GPU's, etc. so i buy in bulk.

from cheapest to best most expensive compound out there performce is really nil.  so really, whatever you got...use.

--- End quote ---

I haven't bought any yet, so thanks for the pointer.  I need to find a damn IDE DVD drive to reinstall software.  Good times.

ed12:
klov has an exelent d/l page for  merit

ed

Navigation

[0] Message Index

[*] Previous page