I own an original Atari Asteroids cocktail cabinet. The power comes on. The monitor
has no video. The P1 and P2 buttons stay a solid red.
I see from this website (
http://arcarc.xmission.com/Tech/Asteroid%20Tech/asteroidsrepair.html#P3) that it says that:
3.* Problem: No video, P1 and P2 stay lit. No Game Play*
Cause: Connector to logic board not making good contact with the edge
fingers.
Fix: I used a pencil eraser to clean the fingers. I also noticed that the
pins inside the connector were worn and not making good contact. I used a
jewelers screwdriver to gently put a small bend in each pin. (I really
should replace all the pins!)Can anyone recommend a site that sells the pins? I would love to replace them
but being an amateur I am having the hardest times figuring out what the
parts are called and the sizes.
Thanks in advance!
Battlecat