Sorry to bump this thread, but I'm still stuck...
This is my config file:
1,1,1,1,0,5,1,3,200,0,0,,1,0,0,0,0
P1_START,1,SINGLE,0,0,0,0,0,0,0,18,48,0
P1_BUTTON1,1,SINGLE,0,0,0,0,0,0,0,8,48,0
P1_BUTTON2,1,SINGLE,0,0,0,0,0,0,0,9,48,0
P1_BUTTON3,1,SINGLE,0,0,0,0,0,0,0,10,48,0
P1_BUTTON4,1,SINGLE,0,0,0,0,0,0,0,11,48,0
P1_BUTTON5,1,SINGLE,0,0,0,0,0,0,0,12,48,0
P1_BUTTON6,1,SINGLE,0,0,0,0,0,0,0,13,48,0
P1_BUTTON7,1,SINGLE,0,0,0,0,0,0,0,14,48,0
P1_TRACKBALL,1,SINGLE,0,0,0,0,0,0,0,15,48,0
P2_START,1,SINGLE,0,0,0,0,0,0,0,25,48,0
P2_BUTTON1,1,SINGLE,0,0,0,0,0,0,0,1,48,0
P2_BUTTON2,1,SINGLE,0,0,0,0,0,0,0,2,48,0
P2_BUTTON3,1,SINGLE,0,0,0,0,0,0,0,3,48,0
P2_BUTTON4,1,SINGLE,0,0,0,0,0,0,0,4,48,0
P2_BUTTON5,1,SINGLE,0,0,0,0,0,0,0,5,48,0
P2_BUTTON6,1,SINGLE,0,0,0,0,0,0,0,6,48,0
P2_BUTTON7,1,SINGLE,0,0,0,0,0,0,0,7,48,0
ADMIN_PAUSE-P1,1,SINGLE,0,0,0,0,0,0,0,17,48,0
ADMIN_PAUSE-P2,1,SINGLE,0,0,0,0,0,0,0,26,48,0
ADMIN_VOLUME,1,SINGLE,0,0,0,0,0,0,0,19,48,0
ADMIN_EMU,1,SINGLE,0,0,0,0,0,0,0,20,48,0
ADMIN_URO,1,SINGLE,0,0,0,0,0,0,0,21,48,0
ADMIN_MOUSE-L,1,SINGLE,0,0,0,0,0,0,0,22,48,0
ADMIN_MOUSE-C,1,SINGLE,0,0,0,0,0,0,0,23,48,0
ADMIN_MOUSE-R,1,SINGLE,0,0,0,0,0,0,0,24,48,0
ADMIN_PINBALL-L1,1,SINGLE,0,0,0,0,0,0,0,32,48,0
ADMIN_PINBALL-L2,1,SINGLE,0,0,0,0,0,0,0,31,48,0
ADMIN_PINBALL-R1,1,SINGLE,0,0,0,0,0,0,0,29,48,0
ADMIN_PINBALL-R2,1,SINGLE,0,0,0,0,0,0,0,30,48,0
ADMIN_POWER-CAB,1,SINGLE,0,0,0,0,0,0,0,28,48,0
As you can see, all buton are setup to use single intensity.
Also, the first line that specify to lit the ctrl buttons, seems to be setup properly.
Any idea why the control button won't stay ON while in Mala or when Mame game is launched?
Note: All leds ramp up and flash when Mala launch. So I can confirm that they are properly connected/controlled on the ledwiz.
PS:you can disregard my question about when exiting mala. If needed, I'll use a command line at mala's exit...