Main > Driving & Racing Cabinets

Cruisin Exotica pots questions

(1/1)

Dutsk:
Hi all

Been looking at converting my Cruisin Exotica to a console cabinet as I bought it w/o the arcade pcb in it. I was wondering a few things about the game. Already looked through the manual.

Is it single or dual axis?
What size are the pots? EDIT:::::: I've found out they are 5k ohm
What is a good easy console wheel to hack that could be compatible with existing arcade parts?

Please help Before I break out the multimeter and poke around where I am uncertain.

Below is all I get from manual

PL1:

--- Quote from: Dutsk on December 08, 2015, 08:54:44 pm ---Is it single or dual axis?

--- End quote ---
Page 86 of the manual here, right side, 2/3rds of the way down you can see the foot pedals part of the schematic.

The two pots are wired in parallel -- both have 5v to tab 1 (or 3?) and both have ground to tab 3. (or 1?)

Both pots have an output on tab 2 -- brake on ORG VIO wire, gas on ORG GRY.

This is a standard "dual axis" configuration.


--- Quote from: Dutsk on December 08, 2015, 08:54:44 pm ---What size are the pots?

--- End quote ---
Steering pot P/N 5014-12909-00 is a 5k.  Twisted Quarter has them here.

Pedal pots P/N 50-8026-00 (or 96-4916-00?) are also 5k.


Scott

Navigation

[0] Message Index