PACLED64 and LEDBlinky Cabinet Lighting

[greggooch]

Hi guys, I am trying to use a dedicated PACLED64 with LEDBlinky for cabinet LEDs and I'm having some trouble.  I'm using 5050 strip RGB LEDs and I can only get the red LED to light for some reason.

I've tried different brands of strips (3M and a Chinese no-name), I've tried different pins on the PACLED64 board, fresh wires & connectors, cutting the strip down to about 12-18" long, but nothing.

Thanks in advance!

[MydknyteStyrm]

I have a third PACLED64 used for cabinet lighting, so I might be of some help. Do you have a pic of your wiring? If the Red is lighting only, are the green and blue wires in their respective ports?

[greggooch]

Here's a drawing I hope will help.