At the request of spystyle I will post the dimentions of the cabinet.
I don't have a drawing or anything but I can give you the dimemsions.
It is built out of 3/4" ply.
The side panels are 4 3/4" H x 28 3/4" L
All the interior panels are 13 1/2" wide.
Bottom panel is 13 1/2"w x 26 1/2" L
The Control Panels are 6"H x 13 3/8" (slightly smaller for them to sit in nicely after painting)
The end pieces are 2 2/3" H x 13 1/2" W
I used 3/4" square stock to mount the panels together with a nailer and glue.
The Plexi is 17" L x 13 7/16" wide (again, to fit after painting).
It is a standard Dell 1708 monitor sitting on two 4" square pieces of ply for the height needed.