At the request of spystyle I will post the dimentions of the cabinet.

I don't have a drawing or anything but I can give you the dimemsions.

It is built out of 3/4" ply.

The side panels are 4 3/4" H x 28 3/4" L

All the interior panels are 13 1/2" wide.

Bottom panel is 13 1/2"w x 26 1/2" L

The Control Panels are 6"H x 13 3/8" (slightly smaller for them to sit in nicely after painting)

The end pieces are 2 2/3" H x 13 1/2" W

I used 3/4" square stock to mount the panels together with a nailer and glue.

The Plexi is 17" L x 13 7/16" wide (again, to fit after painting).

It is a standard Dell 1708 monitor sitting on two 4" square pieces of ply for the height needed.