HIDING WINDOWS 7 - 2015 TUTORIAL - COMPLETE

[markronz]

So the title of this post says "WINDOWS 7 - 2015"  Does that mean it also covers Windows 10?  If not, is there a similar guide for Windows 10 somewhere?  This one looks very well written but the text of it only mentioned Windows 7 so I wasn't sure.   Anyone know?

[clhug]

Some stuff from this applies to Win 10, but a lot doesn't.  I've not yet figured out how to do some things in Win 10.

[rablack97]

Correct, there isn't a complete win10 tutorial for hiding the OS that I have seen.

This one does not cover windows 10.

[keilmillerjr]

Correct, there isn't a complete win10 tutorial for hiding the OS that I have seen.

This one does not cover windows 10.

I have windows 10 almost completely hidden. Pm me guys if you want me to write a tutorial.

[markronz]

I would love to see a guide written up!

[rablack97]

Same here any update

Sent from my SM-G920P using Tapatalk

[Vincefaro]

Ok sorry to start this thread again , I m in the middle of setting up my arcade and I followed the steps and it is working , however I may have jumped the gun and I need my desktop back , which part restores the desktop back to normal so that I can continue tweaking other software ?

Thanks


Sent from my iPhone using Tapatalk

[rablack97]

Instant sheller

Sent from my SM-G920P using Tapatalk

[DTxAg]

This seems to be a good thread for this question.

I have used Windows 7 Boot Updater to change the Windows 7 boot screen, and when the computer is hooked up to an LCD TV you can see the new boot screen.

When I hook the computer up to my WG D9200, it says "Out of Range" during the boot sequence and you can't see anything until Windows completely loads. Even if I use the nobootgui option when booting, it still says out of range. If I try to use the "base video" option in msconfig, it boots up to a black screen that doesn't work.

Any idea how to force Windows to display the boot screen?

[Vincefaro]

So I am still getting the "Welcome" Screen with the background and "Shutting Down" . Which part did I not remove? Everything else is removed.

[rablack97]

did you remember to hit the green arrow to compile it after you made the changes, and did you run the mcbuilder?

Also, turn off windows updates, new updates will overlay your work, and cause things to re-appear.

If you still have the welcome you did something wrong with Windows 7 Logon Background changer.

[Vincefaro]

I did not run that, That fixed it . Thank you.

Instant sheller

Sent from my SM-G920P using Tapatalk

[P.H.U.]

For those of you that are using Calamity's CRT Emu drivers, that 'Test Mode' watermark in the bottom right hand corner bugged me badly enough to look for a way to get rid of it. Here is the file and what entries you must edit:

File:  C:\Windows\System32\en-US\user32.dll.mui
String Table:

45 : 1033
--715,    "%wsWindows %ws"
--716,    "%ws Build %ws"

47 : 1033
--738,    "Test Mode"[/list]

You can remove what is in quotes, or you can edit the text to customize/brand your emulation cab. But you can't turn off TEST MODE; that kills Calamity's drivers. Trust if you have made it thus far, you can figure out how to do the rest of the steps w/Resource Hacker and mcbuilder.

[G0nz0]

Is the dropbox files still available? I don't see a link.


TIA

[PL1]

Is the dropbox files still available? I don't see a link.

As mentioned earlier in the thread, it's in the OP, but the text color makes the link hard to identify.

Click on the white "Tutorial Tools" text . . .

To save you some time, I have provided a Dropbox link which will have all of the basic tools/files to follow the tutorial.

Tutorial Tools

. . . or this link.
https://www.dropbox.com/s/h1sbj3ntab9d9ec/Hide%20Windows%207%20Files.rar?dl=0


Scott

[Rahzel]

The link to the tutorial files is broken. Could someone please mirror it?

[Mark Norville]

I would avoid doing this like the plague, in other words avoid it at all costs.

The reason being is that I done this on my home cinema PC I think it was, or it might have been my arcade PC. I wanted to exit out and go to the operating system so that I could make changes. To my horror I could not exit to the operating system, so I was starting to panic, I eventually got back into my system and removed the instant sheller and would not recommend using one, unless you have your system 100% configured, but even then I would not recommend it.

If you want to do a poor mans version of this, change the windows boot screen, and have your desktop clear of icons and add whatever you want in your start up folder.

So you boot up, and HyperSpin loads straight away, on an SSD you will hardly notice the load time. At least this way you can still access your PC at any time.

Just my two pennies worth, it works for some people but not others, especially not if you want to make changes, especially for two seconds of loading time.

Regards

Mark

[Trnzaddict]

I would avoid doing this like the plague, in other words avoid it at all costs.

The reason being is that I done this on my home cinema PC I think it was, or it might have been my arcade PC. I wanted to exit out and go to the operating system so that I could make changes. To my horror I could not exit to the operating system, so I was starting to panic, I eventually got back into my system and removed the instant sheller and would not recommend using one, unless you have your system 100% configured, but even then I would not recommend it.

If you want to do a poor mans version of this, change the windows boot screen, and have your desktop clear of icons and add whatever you want in your start up folder.

So you boot up, and HyperSpin loads straight away, on an SSD you will hardly notice the load time. At least this way you can still access your PC at any time.

Just my two pennies worth, it works for some people but not others, especially not if you want to make changes, especially for two seconds of loading time.

Regards

Mark

Hmm....did you try running Explorer.exe when you brought up task manager? I was shelled like this and anytime I needed to perform some maintenance here or there I just ran Explorer and your desktop should show right up.

[Mark Norville]

I had to insert my windows DVD in and got into the operating system that way, I never used this guide, I cannot remember what website I done the sheller from, but it was more hassle than it was worth for me. I was expecting that it would exit the program and then want to load up the OS, sadly was not the case, I could not access anything, I think all what I had was a dead screen and keyboard etc would not work.

I was lucky that I managed to get back in without formatting, but someone with less PC knowledge might have struggled.

[Foxhole]

Adding mirros to the file, since the link isn't available.
https://drive.google.com/open?id=134GHZ0yoO89wi10Yerd-IhPMywXjnzGP
https://www.dropbox.com/s/7zvg44uro5tp8b1/Hide%20Windows%207%20Files.rar?dl=0
Also added it as an attachment.

[formula409]

I would avoid doing this like the plague, in other words avoid it at all costs.

The reason being is that I done this on my home cinema PC I think it was, or it might have been my arcade PC. I wanted to exit out and go to the operating system so that I could make changes. To my horror I could not exit to the operating system, so I was starting to panic, I eventually got back into my system and removed the instant sheller and would not recommend using one, unless you have your system 100% configured, but even then I would not recommend it.

If you want to do a poor mans version of this, change the windows boot screen, and have your desktop clear of icons and add whatever you want in your start up folder.

So you boot up, and HyperSpin loads straight away, on an SSD you will hardly notice the load time. At least this way you can still access your PC at any time.

Just my two pennies worth, it works for some people but not others, especially not if you want to make changes, especially for two seconds of loading time.

Regards

Mark

That's why, at this point, you're better off just using Windows 10. It's incredibly easy to hide everything in Windows 10, and easy to revert it back to normal behavior.

[clhug]

That's why, at this point, you're better off just using Windows 10. It's incredibly easy to hide everything in Windows 10, and easy to revert it back to normal behavior.

Can you elaborate?  HOW do you hide things in Windows 10?  I have not been able to figure it out, and I can't find a guide anywhere.  I AM using Win 10 for my MAME PC, but I still see the standard Win 10 boot screen.  I've not been able to find a way to hide or replace it.  Also, there is no startup or shutdown sounds in Win 10.  I found a workaround for startup sounds by using a scheduled task on startup to play a sound, but I can't find any such workaround for shutdown sounds.  (I have fun arcade sounds for both startup and shutdown on my previous MAME PCs up until Win 10.)

Thanks!

[Phreakwars]

I had to insert my windows DVD in and got into the operating system that way, I never used this guide, I cannot remember what website I done the sheller from, but it was more hassle than it was worth for me. I was expecting that it would exit the program and then want to load up the OS, sadly was not the case, I could not access anything, I think all what I had was a dead screen and keyboard etc would not work.

I was lucky that I managed to get back in without formatting, but someone with less PC knowledge might have struggled.

I just use Team Viewer. Then you can even see the mouse if you have it hidden on the cab and can send key combos like Ctrl+alt+del or windows key. Have almost all my cabs running 7, never had issue getting into the OS.

[JohnDoh]

thanks for the tutorial