Hello Mortal Kombat Super Fans!
I snagged some MK2 bezel graphics off of some random forum (maybe this one) and I thought "This looks pretty bad."
So I completely started over and here are the results.
Size: 25 x 25 inches
Fit: Original Dedicated MK2 Cabinet
Print: Heavy glossy paper
This fits well in an original MKII cabinet.
I used a couple pieces of double sided tape to adhere the top of it to the original plastic bezel so that I could slide the glass back into the cabinet without this custom insert sliding around.
I printed it on glossy paper because the matte paper was too dull.
It costed me $40 to print it at Kinko's, but only because I was too lazy to find a cheaper alternative.
I did have to cut the center out of this print. I do not recommend a razor blade to cut the center out because it leaves a noticeable white edge on the borders (cut line).
When I used scissors to cut this, it did not leave much of a white edge, but I had to carefully make a straight cut.
Good luck everyone and please enjoy this!
.jpg file
http://i137.photobucket.com/albums/q211/drakedragoon1/mk2_bezel.jpgPlease leave a comment if you see an error or just to say thanks!