Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: do they make a vga to vga scaler thats not expensive?  (Read 727 times)

0 Members and 1 Guest are viewing this topic.

800screws

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 41
  • Last login:November 10, 2019, 07:37:29 am
  • I want to build my own arcade controls!
do they make a vga to vga scaler thats not expensive?
« on: September 25, 2015, 05:36:17 pm »
need to move my picture around on the monitor....its a atomiswave board....so its putting out vga and its going to a vga monitor but the picture is shifted to the right. the monitor doesn't have options to move the picture....any ideas or recommendations?
Logged

grantspain

  • I personally prefer "bog trotter"
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6175
  • Last login:Yesterday at 04:23:34 pm
Re: do they make a vga to vga scaler thats not expensive?
« Reply #1 on: September 25, 2015, 07:38:03 pm »
you must have an auto scan,that should sort it out
Logged

800screws

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 41
  • Last login:November 10, 2019, 07:37:29 am
  • I want to build my own arcade controls!
Re: do they make a vga to vga scaler thats not expensive?
« Reply #2 on: September 25, 2015, 07:41:29 pm »
well...im acutally running a game king 2019 in 1 in the same cab with a splitter board...the game king's picture is fine but the atomiswave is shifted to the right....I need to use a scaler just on the atomiswave to move it to the left....

is there anything like that? Ive searched but couldn't find a vga input and vga output
Logged
Pages: [1]
  
Go Up
« previous next »