| Main > Project Announcements |
| MortalKab 4 player DIY slim arcade cabinet/ Finished / Update? |
| << < (15/91) > >> |
| ChanceKJ:
--- Quote from: deezdrama on July 23, 2015, 07:55:43 pm ---...somehow missed Chances comment that he cut his sides to hold the CP at a slight angle so now must angle my CP frame. --- End quote --- Yeh, haha. That 4° angle is in the finished plans I have in my thread that are available for download. You're building from my "pre-production" plans, remeber. To save time and pulling your hair out trying to design an angled CP box, I'd put a protractor up to the sides and add that slant to the ledges before going any further. Put it on its side and just trim them up with a scroll saw. |
| deezdrama:
--- Quote from: ChanceKJ on July 23, 2015, 08:36:00 pm --- --- Quote from: deezdrama on July 23, 2015, 07:55:43 pm ---...somehow missed Chances comment that he cut his sides to hold the CP at a slight angle so now must angle my CP frame. --- End quote --- Yeh, haha. That 4° angle is in the finished plans I have in my thread that are available for download. You're building from my "pre-production" plans, remeber. To save time and pulling your hair out trying to design an angled CP box, I'd put a protractor up to the sides and add that slant to the ledges before going any further. Put it on its side and just trim them up with a scroll saw. --- End quote --- Yeah... I thought about doing something like that problem is Ive got that CP cross support board already glued/screwed in and another strip glued/screwed to the front of that. |
| ChanceKJ:
Pull the screws, then take a skil saw and cut them off. Problem solved. :D |
| deezdrama:
--- Quote from: ChanceKJ on July 23, 2015, 08:52:09 pm ---Pull the screws, then take a skil saw and cut them off. Problem solved. :D --- End quote --- Ill probably give a go at the angled frame with the scrap ply I have...... and when that dont work (lol) ill go back and angle my side panels |
| deezdrama:
Whats the best thing to use one that notched out button hole? Bought some wood filler but dont know if it will work. I have some marine epoxy putty.... think I should use that? Or should I get bondo? |
| Navigation |
| Message Index |
| Next page |
| Previous page |