| Main > Project Announcements |
| MortalKab 4 player DIY slim arcade cabinet/ Finished / Update? |
| << < (12/91) > >> |
| deezdrama:
Ok.... i dont want to skimp on the coin mechs. The question now is.... Would you rob the vendetta cab of the coin doors, or sell the vendetta cab for $150 to go torwards new coin doors? do all 4 player games require 4 coin mechs or could one get by on 4p games with 1 coin mech? |
| Malenko:
--- Quote from: deezdrama on July 22, 2015, 02:21:22 pm ---do all 4 player games require 4 coin mechs or could one get by on 4p games with 1 coin mech? --- End quote --- Some games require each player have their own mech/coin input , like TMNT. You can somewhat get around this by mapping 1 coin input to all 4 players. This will create the issue of , for example, all 4 turtles getting credits when only 1 to 3 people are playing. |
| deezdrama:
--- Quote from: Malenko on July 22, 2015, 04:02:36 pm --- --- Quote from: deezdrama on July 22, 2015, 02:21:22 pm ---do all 4 player games require 4 coin mechs or could one get by on 4p games with 1 coin mech? --- End quote --- Some games require each player have their own mech/coin input , like TMNT. You can somewhat get around this by mapping 1 coin input to all 4 players. This will create the issue of , for example, all 4 turtles getting credits when only 1 to 3 people are playing. --- End quote --- I could live with that solong as it dont drop all 4 players in game as soon as they get credits. Know of any games that do that? |
| yotsuya:
--- Quote from: Malenko on July 22, 2015, 04:02:36 pm --- --- Quote from: deezdrama on July 22, 2015, 02:21:22 pm ---do all 4 player games require 4 coin mechs or could one get by on 4p games with 1 coin mech? --- End quote --- Some games require each player have their own mech/coin input , like TMNT. You can somewhat get around this by mapping 1 coin input to all 4 players. This will create the issue of , for example, all 4 turtles getting credits when only 1 to 3 people are playing. --- End quote --- WHAT ABOUT OMEGA RACE BRAH!!!! |
| deezdrama:
Got the top back panel cut and screwed in, need more ply. I had a piece of the 3/4 pine left so figured Id use it for the CP top. Laid out the template and centerpunched everything. Then came the rookie mistake...... :angry: :angry: :angry: I didnt clamp the sheet down and on my first button hole when it broke through it grabbed and tore a chunk out of the hole. Was going to quit but figured I would finish it and use it as practice. After clamping I didnt have any issues..... So what can I do? Fill the area that tore out with putty and then shape that button hole with my dremel and a sanding drum? I drilled the holes on an old table so had a surface under the CP and figured that would stop splintering on the backside....It didnt :angry: The angle grinder and a resin sanding pad made short work of removing the splintered areas and its smooth as a babys but t , Now though theres a slight dishing on the backside of the button groups, Will this cause any issues with buttons sitting flush? Oh I tried the spade drilling halfway then flipping and finished from other side on a scrap piece- and it splintered even worse. It looks fine now that I sanded the splinters away but had to dish out about 1/16" of material so just worried about that causing issues. edit..... also.... does the stick holes look too close to the buttons? :badmood: ( this is how the template was I got online, I thought they looked too close but figured once it was drilled/cut out at 100% size it would be ok but they still look close to me. |
| Navigation |
| Message Index |
| Next page |
| Previous page |