| Main > Project Announcements |
| MortalKab 4 player DIY slim arcade cabinet/ Finished / Update? |
| << < (29/91) > >> |
| yotsuya:
--- Quote from: harveybirdman on August 26, 2015, 09:09:40 pm --- --- Quote from: yotsuya on August 26, 2015, 09:04:08 pm ---Actually, I used the Elmers stuff all the time and don't have any issues with it. --- End quote --- I guess if it dries completely it can work. Using it to fill corner chips is a PITA! --- End quote --- I do it in layers so I never have thick chunks that I need to dry. Reduces cracking. |
| BGoulette:
I use something called M/H ready patch, and that stuff fills nice, dries nice and hard, and sands awesome. Sent from my SAMSUNG-SGH-I337 using Tapatalk |
| stavros693000:
regarding your slot cutting slip up, you could try what other suggested...bogging and re-cutting...............or just use adhesive and tape the t-mould until the glue dries. its only near the corner in 1 spot right? so mallet the rest in and just have that one little mistake glued in, youll never tell the difference. that what I would do, because its the quickest fix solution ,but that's me..lazy, corner cutter ;D |
| deezdrama:
Ya... its just that top edge on the cab and about an 8" spot on the front of the cp. I was going to just glue the t molding on in those areas but went ahead and filled those 2 spots with filler. I dont think the elmer filler will hold but we will see. |
| deezdrama:
It slotted out ok.... not great but better than it was. Im just worried when I go to pound the t molding in - it will crumble. Got the cp and cab screw holes filled in too. Still need to get my tv in there to measure for the boards that will hold the glass in. How far from the screen should my tinted piece of glass sit? |
| Navigation |
| Message Index |
| Next page |
| Previous page |