Main > Driving & Racing Cabinets

Problem with Hack of Steering Wheel

<< < (2/5) > >>

SailorSat:
that should work, but use the ohm meter of your multimeter. - i don't know what values to expect though :)
do NOT power on like that.

kanario40:
In the brown wire there is 103V and in the purple wire nothing.
I go to change the triac U6,because can be that it,s damaged that triac.
What do you think?

SailorSat:
So Blue -> Purple reads nothing? Hm... That doesn't look good.

kanario40:
Today I have changed the triac U6 and nothing.
The led CCW at the begining is switch on in the board when switch on the pc.
After it switch off when I turn the steering wheel a bit.

What I can do more to solve the issue?

kanario40:
I have tested changing the purple wire of CCW by the brown wire of CW and now works fine when I turn to the right but not when I turn to the left.
I go to last measure take the voltaje of CWW to Fase wire of the motor and CW to Fase wire of the motor,to know if gives any voltaje if not will be the motor damaged.

Navigation

[0] Message Index

[#] Next page

[*] Previous page