Ok, so because of this:
golden tee outputs something OTHER than standard resolutions.
resolution: 640x350
h-frequency: 25.7KHz
v-frequency: 60.6hz
pixel clock: 21.5khz
it's the 25.7khz that's the kicker.
the cga/ega frequencies the converter can handle are
14.5 - 16.5khz -which is cga
23.5 - 25.5khz -which is ega
30.5 - 32.5khz -which is vga
as you can see, the frequency falls just outside into the space between ega and vga
...
Neither the medium or low resolutions settings on the GT board will work correctly transitioned to the monitor via the VBA converter?
Am I understanding that correctly?
Should I just get a different monitor?
Thanks for clarifying, Im not the most technical guy.