Main > Raspberry Pi & Dev Board

Intel NUC - Sound output only through HDMI

(1/2) > >>

johnrt:
I have acquired an Intel NUC for my current project. But this NUC doesn't have a line output like regular computers. Sound is delivered via HDMI. I have tried this:
http://www.ebay.com/itm/251420938857
But that won't work with my 15" monitor with resolution 1024x768.

So do any of you have a tip or a good advice for me? Maybe a cheap USB soundcard like this: http://www.ebay.com/itm/281619178703

nitrogen_widget:
So what doesn't work?
I had one of those and while it worked I could do almost any resolution.

I also just plugged my computer speakers into the audio jack.

johnrt:

--- Quote from: nitrogen_widget on April 03, 2015, 08:10:34 pm ---So what doesn't work?
I had one of those and while it worked I could do almost any resolution.

I also just plugged my computer speakers into the audio jack.

--- End quote ---
There simply is no picture. I have another one but without the audio output, and that one works. Well, there may be a defect one I have got though...

nitrogen_widget:
The nuc might not like the adaptor or its bad.
Have you tried it on something else with an HDMI out?

Also I would try an active convertor.
One that uses a a USB port or wallwort to power it.

I bought this one for an android stick and it work well.
http://www.amazon.com/gp/product/B00MW0KOMA/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

StefanBurger:
you must install amixer and make the following call right after booting and before call of mame:

sudo amixer -c 0 cset numid=3 1

here is some related reading:
https://jeffskinnerbox.wordpress.com/2012/11/15/getting-audio-out-working-on-the-raspberry-pi/

Regards
Stefan

Navigation

[0] Message Index

[#] Next page