Author Topic: Rasp Pi and Scan Line generator (Read 3209 times)

j1345 · « **on:** April 03, 2015, 10:57:25 am »

Newbe Question again:

When I get the Pi2 do I need to pick up a HDMI to VGA conveter to use the Scan Line Generator?

Thanks

nitrogen_widget · « **Reply #1 on:** April 03, 2015, 02:05:46 pm »

yes.
I suggest an active converter an a powered hub.
I had very little luck with passive adapters on the RPI and my SLG didn't work with them.
I'd just get a blank screen or didn't get the scan-lines.
I assume it's because there just wasn't enough signal power coming off that setup.

I have a powered/active adapter the other day so i'll see how that works next week.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Rasp Pi and Scan Line generator (Read 3209 times)

j1345

Rasp Pi and Scan Line generator

nitrogen_widget

Re: Rasp Pi and Scan Line generator