Author Topic: How to make a dedicated MAME 0.250 Appliance on a Raspberry Pi 4/Pi 400 (Read 130364 times)

monsieurarcade · « **Reply #400 on:** March 17, 2024, 04:23:18 pm »

Hi,

Been through almost all the steps up to changing file system to read-only.
Created and executed the script:
~/scripts/read-only-rootfs.sh

After execution, Pi boots but stops at some point.
I don't have console access, neither directly with a keyboard or with putty.

Is there something I can do to correct this or revert back to rw so I don't have to start the whole process again ?
Thanks.

24-7-testing · « **Reply #401 on:** March 22, 2024, 11:39:31 am »

Quote from: bbegin on February 05, 2024, 07:23:14 pm

I am currently building MAME 0.262. I will upload a fresh image once the build is successfully completed.

Hi bbegin, just wondering if you have any progress you can share on the latest version of the prebuilt SD image? Any luck building the latest version yet?


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: How to make a dedicated MAME 0.250 Appliance on a Raspberry Pi 4/Pi 400 (Read 130364 times)

monsieurarcade

Re: How to make a dedicated MAME 0.250 Appliance on a Raspberry Pi 4/Pi 400

24-7-testing

Re: How to make a dedicated MAME 0.250 Appliance on a Raspberry Pi 4/Pi 400