Main > Everything Else |
Golden Tee 2001 -2006 CHD's and the U53's, Big Buck Hunter, Carnival King |
<< < (7/17) > >> |
ed12:
not much u need to toggle the rest line to do it steady voltage u MUST MODIFIY THE .HEX let me dig out the c++ code, u will need to fire it into avr studio 6.2 or 5 or 4 and change the -reset timing. if u are un-sure I will de-compile for u ed |
Loopey1:
I do not have AVR studio..... :'( And to be honest, Not sure how to do what you said anyways. A programmer I am not. LOL |
ed12:
ok I will be in my stk500 most of the night no biggie to re-compile will up-load when done ed |
Loopey1:
Thank You Much. |
ed12:
used flash.hex punch them through ultra edit to see there differnce's #2 is the flash after the punch in through the programmer we need to work on the reset,i cannot hold it steady state for it to compile #3 is just a dump of the chip it's comming 1,2 are .bin's 3 is .txt just rename it .bin >remove .txt entision replace with .bin< ed |
Navigation |
Message Index |
Next page |
Previous page |