Main > Retail vendors

RetroArcade Bartop Arcade Cabinets

(1/3) > >>

RetroArcadePro:
How's it going everyone? First off let me say sorry for the crappy pictures, I just wanted to get a few quick snaps to get this up for preorders. Waiting on the replenishment of some components and then I will complete a cabinet for display purposes/better pictures. All parts are made by me on a CNC router and laser engraver/cutter, I will make another thread to offer custom services for those that may need items made with these machines.

Best way to contact me is email to retroarcadepro@gmail.com.

Currently available for order, the RetroCade bartop CNC cut arcade cabinet. Features are as follows.

-Made from 1/2" melamine coated particle board, available in black or white. Slotted to accept t molding.
-Comes standard with 2 player CP made for Happ/IL components. Customization can be had for extra, IE pockets for other style sticks/buttons, extra CP with single player layout.
-Slotted speaker panel made to work perfect with 4" speakers
-Slotted rear panel door for ventilation and hole on back to allow easy gripping of door to remove
-Rear panel has cutout for electrical plug to allow quick and easy power disconnect....no need to run cords from the inside out.
-Comes standard with 3 button holes for each player below CP
-Vesa panel mount which excepts 75x75 or 100x100 patterns
-22" between side panels to allow for 23" monitors, some 24" may fit if they are slim bezel
-Slotted construction to allow easy assembly with glue only
-Acrylic bezel slot in side panels, no need to "smoosh" the acrylic between the monitor and panel pieces to keep it in place like others have you do.
-Bottom panel has access slots below CP batons, allows for easy access for those that wish to screw their CP in.


Price on the cabinet is $225 shipped in the US. With your purchase you get the following.
-All wood pieces to the cabinet in a "flat pack" for assembly
-Laser cut acrylic marquee and bezel
-T molding in your choice of black, white, red, blue, yellow
-Brackets/screws to mount your monitor panel to the sides
-4 vesa bolts to attach your monitor to the mounting piece
-Electrical plug for back piece(power cord splitter with spade connectors to attach to plug will be made available for an extra cost)
-L channel marquee retainer in your choice of black, white or clear
-Velcro strips which can be used to mount the back panel as well as the CP if that is how you wish to mount it.



Again, sorry for the ---smurfy--- pics, check back later in the week for updated ones.

SNAAKE:
so pretty much weeweecade?

is the monitor plexi glass "black/smoked" or all clear? good looking out with slot for monitor plexi.

here is another idea.

RetroArcadePro:
Yes, this is based off the weecade. Kit comes with batons that go in the CP slot that you can either velcro to(velcro included) or screw the CP to(reason for the slots in the bottom so you can easily screw it in from underneath.

Here is a picture of one of my prototype units. They have around 3/4" stickout on the production ones.

RetroArcadePro:
Also, comes standard with clear acrylic. Since I make everything myself though I can easily work with the customer on customization =D

RetroArcadePro:
Cutting out a prototype 2 player neo geo inspired cabinet as I type this   ;D. Pictures to come lately if it works out and doesn't need anything but minor tweaks.

Edit**  Oops, cut it out using an old file with everything not sized. Had some other things to attend to so prototype will have to wait a bit.

Navigation

[0] Message Index

[#] Next page