Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up --- Bug Reports --- Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Rounded corners  (Read 2654 times)

0 Members and 1 Guest are viewing this topic.

Adamsiddle

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 7
  • Last login:February 20, 2015, 04:06:02 pm
  • I want to build my own arcade controls!
Rounded corners
« on: January 18, 2015, 04:47:08 am »
Hi everyone I'm in the middle of building my first bartop arcade cabinet, I have absolutely no woodwork skills or any experience prior to this so it's all new to me and I'm learning slowly. At the moment my corners are fairly sharp I'm looking for the best way or the most effective way to round them off to give it a better look. I'm using 9mm mdf, also am I best to spray paint this or use a roller/brush? Thanks in advance guys.

Le Chuck

  • Saint, make a poll!
  • Wiki Contributor
  • Trade Count: (+6)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5509
  • Last login:June 01, 2022, 05:59:18 pm
  • <insert personal text here>
Re: Rounded corners
« Reply #1 on: January 18, 2015, 08:21:15 am »
Most builds are done with a 1/2" recess for facing panels. Meaning all body panels like the CP, kick plate, marquee, are 1/2" from flush with the side panels. Then you can do a 1/2" radius it on them with a jigsaw.

As yours is mostly flush, or much less recessed I'd just hit it with some sand paper or a sure form rasp and call it good. The build looks ok, just knock a few of the edges down a bit.