April 24, 2024, 09:00:17 pm
0 Members and 1 Guest are viewing this topic.
Also, i've picked up another yard of marine quality vinyl and this weekend i'll be redoing the seat on a new stool to match the Encom one i did for FLYNN's. I'm thinking a big red Nintendo logo? I was gonna do the DKU logo, but i put "Encom" on my other one, so i figure i'd stay with the developer. Maybe a dark Purple nintendo logo?
I see you are using Nintendo joysticks. We should have a long discussion about their pros/cons and if it's possible to break one.
Oh, and -ing castors are IMPOSSIBLE to find replacements for. Nothing at Princess Auto, Rona, Lowes, or Home Depot.Would you believe that there are no less then two specialty shops in this city for castors. a "Casterland" and a place called "Castor Town". I'm gonna check them both out tomorrow and see if they have a set of 2.5" ones to replace these where i can avoid drilling new holes.
2.5" seem to be a match. the mounting bracket has an approximate hole pattern of 28mmx55mm on centre. The wheels on these read "65x25" on the sides.I'm gonna take one into the store tomorrow and try to find a match, I found IDENTICAL ones on Amazon.com from Hong Kong under the name "2.5" White Single Wheel Flat Plate Light Duty Nylon Rigid Caster" but they won't be here until the end of June. Thats my second option if i can't find them in town. I don't really want to wait that long for them.
Thanks! I'm using 2x3's and a 102' roll of medium weight plastic. Its roughly 8' cubed.
oh well, would have probably paid more from some guy on KLOV, and 15 days is a lot better then 30.