| Main > Main Forum |
| Retro fit a Golden Tee Live (2013) game to Golden Tee 2005? |
| (1/1) |
| akfransen@sbcglobal.net:
Hey all, I'm struggling with the connections to retrofit a 2013 Live cabinet, equipped with the front panel (trackball, buttons, harnesses, and coin wiring), to a GT 2005 Fore PCB. I've got the video conversion covered so I can output to a LCD monitor, but after reading all the forums I'm struggling with how to get all the controls working from the 2013 Live cabinet. Any help? Thanks! |
| JimmyU:
It looks like Live uses an IO board while the Fore series uses a JAMMA harness plus a trackball connector for the controls. Here is a link for the Fore manual. Do you have a green board or a red board? They use different power supplies, so be careful when you buy one. I was just at Incredible Technologies today to pick up a part. What are you going to do with the old Live? |
| akfransen@sbcglobal.net:
It's the red board. I ordered the new power supply from IT today just to make sure I had the right power/voltage. I didn't want to take a chance getting that wrong. I also called their tech support about compatibility and he said I would be best off just starting over on the controls since the jamma outputs won't be close to what is currently in the cabinet. So I guess that's what I'll do! I do not have the old Live PC that was in the original cabinet. I received the cabinet completely stripped. Sorry! |
| Navigation |
| Message Index |