| Main > Main Forum |
| Sources for Bartop/Countertop Cabinet kit? |
| (1/2) > >> |
| Charles4400:
Hey everyone, wanted to build a bartop/countertop arcade for my nephew. Do you know of any sources which are reasonably priced under $200 for a 1 player cabinet kit? I'm just looking for the cabinet kit itseld without internals or controls. Found some online but some were overly priced (>$300) and some were sold as a full setup which is not what I'm looking for. I am definitely not a woodworker so cutting the sides etc. is not an option for me. Thanks! -Charles |
| JDFan:
Take a look through the Retail vendors sub forum and you'll see a few options depending on where you are located -- ie. assuming you are in US (Rick's Custom if in Canada is similarly priced) Haruman's ( http://forum.arcadecontrols.com/index.php/topic,130522.0.html ) has a 1 player bartop kit for $140 ( + $10 for slot cutting if you want to use t-molding, and +$40 If you want it to include the plexi for the marquee and monitor bezel) so less than $200 including the plexi and T-molding slot cut. |
| pbj:
Should have gone to the Houston show... we've clearly hit peak bartop. Nobody was playing the things and I didn't see a single sale made. |
| notroubleclubber:
Is there anywhere in the Uk that sells the same as im after exactly the same for my nephew and im useless at woodwork. Ebay seems quite expensive what seems like a few panels of wood cut to size. |
| Charles4400:
--- Quote from: JDFan on November 12, 2014, 11:46:49 am ---Take a look through the Retail vendors sub forum and you'll see a few options depending on where you are located -- ie. assuming you are in US (Rick's Custom if in Canada is similarly priced) Haruman's ( http://forum.arcadecontrols.com/index.php/topic,130522.0.html ) has a 1 player bartop kit for $140 ( + $10 for slot cutting if you want to use t-molding, and +$40 If you want it to include the plexi for the marquee and monitor bezel) so less than $200 including the plexi and T-molding slot cut. --- End quote --- Thanks for the leads, I will hit up Haruman, It looks to be exactly what I am looking for. Much appreciated! -Charles |
| Navigation |
| Message Index |
| Next page |