| Main > Main Forum |
| Pac-Pro with longer shaft bottom mounted in 3/4" |
| << < (2/2) |
| jaharr01:
You could take 2 pieces of 3/8 board make the relief area on top of the second board. cut the hole out for the joystick. Then drill a hole in the top board over where the joystick is cutout then, then glue them together.See side view attached.If your joy sticks are in a line you could cut out the relief with a saw Jay |
| AzureKnight:
Thanks for the feedback. Honestly, I'm not too worried about mounting it or that the shaft would be too long. I'm worried that the stick won't perform well/correctly with the longer shaft bottom mounted through 3/4" as it was designed to be top mounted with the shorter shaft. I could top mount it, but I won't be buying one until my CP is done. It would be quick and easy to install it bottom mounted. But since I have a layered plexiglass top on my CP it will be a LOT of work to unhook everything to top mount it. |
| Navigation |
| Message Index |
| Previous page |