| Main > Main Forum |
| 25 cent button from groovygamer wiring question |
| (1/1) |
| pman77:
*** figured it out the solid black is ground and the green/black is 5v. both need to be plugged in. I got the groovygamer 25 illuminated push buttons and looking at the instructions it talks about a red wire going to 5v on the molex and the black going to LED-WIZ which i don't have. http://groovygamegear.com/webstore/index.php?main_page=product_info&products_id=295 However my buttons came with a solid black wire and a green/black striped wire not a red one. I'm assuming the green/black goes to the the 5v on the molex and the solid black on the button isn't used ? Also for testing purposes does the ground on the button have to be connected for it to illuminate? thanks for the help. P |
| mvolke1:
I just did these. I can check when I get home later. I am using a 12v adapter, though. If I remember correctly, I cut the tip off the adapter cord and I linked the green with the striped wire on the adapter, and the solid black with the solid black and it worked. |
| pman77:
*** figured it out the solid black is ground and the green/black is 5v. both need to be plugged in. |
| Navigation |
| Message Index |