| Main > Main Forum |
| T-Molding size question and options |
| (1/1) |
| britishknight:
So I have done a far amount of work on a cabinet and its actually all assembled. The cabinet is made out of 5/8 MDF. I cut a slot with a 1/16 slot cutting bit. Now that I look at the t-molding on t-molding.com, i see that their 5/8 t-molding needs .080. Should I A. Cut a bigger slot and buy the 5/8 t-molding B. buy the 3/4 t-molding and trim it with a chisel (My control panel is 3/4 so I do need some 3/4 t-molding) Let me know what you think thanks |
| PL1:
If you want to trim the width of the t-molding, check out this post. Scott |
| Navigation |
| Message Index |