| Main > Everything Else |
| KADE-compatible AVR vendors reference list |
| << < (12/13) > >> |
| MaxRod:
I agree 100% helder. The u4 is dirt cheap right now and readily available. I've even seen some of these on ebay being sold as leonardo clones for less than 4 dollars/pc. |
| PL1:
The MattairTech 32u4 board with "atmel DFU" bootloader (used in KADESTICK) works with Bruno's miniArcade 2.0 Mapper program that is currently in development. Scott |
| bootsector:
--- Quote from: PL1 on February 16, 2017, 07:02:57 am ---The MattairTech 32u4 board with "atmel DFU" bootloader (used in KADESTICK) works with Bruno's miniArcade 2.0 Mapper program that is currently in development. Scott --- End quote --- Non-atmel DFU bootloader is preferable over Atmel's. |
| PL1:
--- Quote from: bootsector on February 16, 2017, 01:44:13 pm --- --- Quote from: PL1 on February 16, 2017, 07:02:57 am ---The MattairTech 32u4 board with "atmel DFU" bootloader (used in KADESTICK) works with Bruno's miniArcade 2.0 Mapper program that is currently in development. --- End quote --- Non-atmel DFU bootloader is preferable over Atmel's. --- End quote --- Good info. ;D I've only tested with "atmel DFU" which requires a pullup resistor -- projects certainly would be easier without the extra component. Scott |
| equlizer:
Will this software work with this? https://www.amazon.ca/Elegoo-Board-ATmega2560-ATMEGA16U2-Arduino-Compatible/dp/B06XDB2CBG/ref=pd_cart_recs_2_4?_encoding=UTF8&pd_rd_i=B06XDB2CBG&pd_rd_r=JHDX43RT8BXRTKWCHE88&pd_rd_w=tNmCX&pd_rd_wg=X6BZ4&psc=1&refRID=JHDX43RT8BXRTKWCHE88 |
| Navigation |
| Message Index |
| Next page |
| Previous page |