Main > Main Forum
Any plans or pics for rotary interfaces.
rdagger:
This message replaces a prior message, because I noticed a mistake on the schematics. Joystick 2 pin 8 was connected incorrectly to the AVR pin 7. Joystick 2 pin 7 should have been connected to AVR pin 7.
Once again, I just want to thank Druin for being a pioneer. I recommend that most people would be better of buying his interface. The DIY approach is really only for people who enjoy soldering and want to learn about microcontrollers. Also Druin's board is more reliable then a perf with soldered wires.
My first prototype was tested with a keyboard hack using a 3000 uS high pulse. I am writing another version to reverse the polarity so it will work with the more popular keyboard encoders. I still need to get an encoder. Once I get one, I will be able to determine the proper pulse length.
A web page may take me a few weeks because I'm in the process of moving. Here are the schematics. I'm not an engineer, so I appologize if they are unconventional.
ripzone:
Does anyone have the code for this DIY adapter?