| Main > Main Forum |
| Kickstarter project - Ultimate Mancave, need tips please |
| << < (2/15) > >> |
| Skinnysloth:
Are the X-box controllers removable? I feel like it will get in the way or just jab into my stomach or crotch when using the arcade joysticks. |
| sharpfork:
I've been a part of a successful kickstarter. What do you want to know? |
| Le Chuck:
To be honest this might not be the best place for feedback on your rig because we aren't your target audience for the most part. Besides it looks complete and if you're at the launch phase you don't really need to hear opinions on how/why we would change your control panel/cab/system peripherals etc. I am intrigued by the analog button tho and would like more specs on that. |
| Gravity123:
Yes, they are removable and also bend out of way. The brackets are similar to the Xbox retail kiosk. Sharpfork: since you know Kickstarter just was hoping to find some people to look over it and give me some tips. Are my pledge levels OK? Are they clear or do they leave you with a lot of questions, etc. Video to long/short, too much info, or anything else that just stands out as a mistake? I'm hoping the price points are reasonable, I haven't seen a whole lot of Kickstarters with $1500 and up items. Not sure how it will go so I made some lower level items such as the analog buttons and single player controller. Thanks for looking! |
| Gravity123:
Le Chuck: the analog button has the traditional cherry switch with two other pins coming off of it (so 5 total). The resistance is 5k and as the plunger presses it drops all that way down to 0. It is done with dome conductive rubber, similar to gamepads but exaggerated to cover the longer button travel. It is not a modified Happ, it is all custom tooling but the feel is similar to competetion buttons. |
| Navigation |
| Message Index |
| Next page |
| Previous page |