Main > Main Forum

Control Panel Build, Need Input

Pages: << < (3/3)

tagbone:

What are the dimensions you are running anyway?

tkropp17:

48"x21" I can send you the file if you'd like.

tagbone:


--- Quote from: schlsux on September 19, 2014, 11:39:19 am ---48"x21" I can send you the file if you'd like.

--- End quote ---

That would be great, much appreciated.


AzureKnight:


Make sure you take into account what is happening BELOW your control panel.

Most likely what you are mapping right now will lose some of the side space to overhang (some cps have little to none while others have several inches) in addition to the thickness of the wood for the side of the cp.   The joysticks all have a rectangular mounting base and need some room for wiring the switches.  Make sure you leave enough room between your joysticks and the sides (including the "front") of the cp as well as enough space between the button and the joystick.

I'm building my cabinet now and I made some of those a bit tighter than I should have.  I was lucky, it all fit, but just barely.


Pages: << < (3/3)

Go to full version