| Main > Main Forum |
| Isolation Transformer wiring help! |
| (1/3) > >> |
| KonkeyKong:
This is from a Taito Frontline cab that was pretty much gutted when I got it. I'd like to be able to use the isolation transformer to just power the monitor. It's not a basic iso as it's got 6 input wires. I've tried several configurations with no success. I can't for the life of me figure out how 1 & 2 get connected with 3,4,5,6,7,8. |
| pbj:
Run a cord from the outlet in your wall to pins 1 and 2. Get out the multimeter and touch pairs of pins until you find two that give you 120VAC. |
| chopperthedog:
5&3 or 8&6 good day. |
| KonkeyKong:
Chopper - made perfect sense, but both combos blew fuses... |
| chopperthedog:
1&2 are your supply (power from the wall) 5&3 or 8&6 will give you your isolated 120v. good day. |
| Navigation |
| Message Index |
| Next page |