Main > Main Forum
Time delay relay question
<< < (2/3) > >>
rawbe:
The more info I have about the relay is:

Product Name : Time Relay w Base;Type : AH3-3;Rated Voltage : 110VAC
Contact : 5A 250VAC Resistive Load;
Time Range : 0-60 Minutes;
Number of Terminals : 8
Mount Rail Type : DIN Rail;Mount Hole Diameter : 4mm/ 0.157";Mount Hole Distance : 33mm/ 1.3"(Center to Center)
Total Size (Approx.) : 55 x 40 x 87mm/ 2.2" x 1.6" x 3.4"(L*W*H);Color : As Picture Shown
Net Weight : 164g;Package Content : 1 x Time Relay,1 x Base
Product Details
Manufacturer:AmicoManufacturer

I didn't put a link because I am without a pc this weekend and I am using my phone.

http://www.amazon.com/gp/r.html?R=RJCT0DZNH81E&C=3TG14KBDH777U&H=4XQAHRES8JDK49C6W7KKQLDP8KKA&T=C&U=http%3A%2F%2Fwww.amazon.com%2Fdp%2FB00ARBSRDY%2Fref%3Dpe_385040_30332190_TE_dp_1

Hopefully this is the correct info to find out if the relay is compatible with my monitor. I am hoping to turn all power on (pc, marquee, sound, and monitor) but have the monitor delay powering on for 30secs.

Thanks,
Robbie
rawbe:
http://www.amazon.com/gp/aw/d/B00ARBSRDY/ref=redir_mdp_mobile?ref_=pe_385040_30332190_TE_dp_1
MTPPC:
This is what you want.

http://www.ebay.com/itm/271411932106?_trksid=p2059210.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
PL1:
Pretty sure that the relay you're asking about isn't the one you want to use for this application, Robbie.

* First reason is the time delay of 0-60 minutes -- not sure how small of an increment you can adjust this by, but a 0-10 or 0-30 second delay relay would be better adjustable for what you're doing.

* Second reason is no datasheet.   :dunno

It looks like a knockoff of the Omron H3Y-2 series relays that you *might* be able to wire like the left half of the diagram below (120v AC connected to the coil instead of 12v/ground) -- assuming that your monitor draws less than 5 Amps (?) and you adapt the pinout to match your relay and base.

I'd feel comfortable working out the specs on it and how to wire it up for proper operation if I was there to help you in person, but trying to do this via forum posts isn't very safe IMHO.

Rablack97 used a 12v Omron H3Y-2 0-10 second delay relay for one of his XBox bartops here.

The wiring diagram for the relay/base he used in that thread is attached below.


Scott
rawbe:
Thanks guys for the advice!
Navigation
Message Index
Next page
Previous page

Go to full version