| Main > Main Forum |
| Help opening Namco Exceleena Blue Control Panel/Monitor |
| (1/2) > >> |
| fatsgt:
I recently bought a Namco Exceleena Blue machine. It looks like the control panel and monitor are accessed by two Tubular Locks underneath the control panel. The game actually had a tubular lock key hanging off a wire inside it. Yeah! Well, when I tried the key it didn't turn in the lock. Seems strange that they would wire in a key that did not fit this cabinet? Anyway, I guess my only recourse is to drill out those tubular locks and replace them? I don't want to damage the machine though. Are the locks on this machine fairly standard and easy to replace? |
| HaRuMaN:
Usually the coin box is keyed differently than everything else. Do you maybe have that key? |
| fatsgt:
--- Quote from: HaRuMaN on June 30, 2014, 09:58:59 am ---Usually the coin box is keyed differently than everything else. Do you maybe have that key? --- End quote --- I have keys for System board door, Coin Mech door, and, Coin Storage doors. I also have a tubular lock key that should unlock the two locks that secure the control panel and access to the monitor but it seems to be the wrong key? Think I might have to drill those out. Hoping they are pretty standard to replace. I can take a pict if if would help. |
| paigeoliver:
I had to drill all the locks on my Exceleena 2. Replacements were easily found at home depot. |
| fatsgt:
--- Quote from: paigeoliver on June 30, 2014, 07:20:15 pm ---I had to drill all the locks on my Exceleena 2. Replacements were easily found at home depot. --- End quote --- Thanks paigeoliver, I've started drilling out the control panel locks, got one, it was a pain. Waiting for my drill to charge now. :) Do you happen to have a link to an Exceleena manual? I want to try an rotate the monitor when I get in there. |
| Navigation |
| Message Index |
| Next page |