| Main > Main Forum |
| Problems with 60 in 1 Arcade Classics Jamma Board |
| << < (7/8) > >> |
| ed12:
.zip your manual and up load it, so i can compare i have several 60-1 manual's.. i have an idea where u are going south here ed |
| fatsgt:
Doh! I wish I could find it. :) I know I had it out reading over it when I first got it but have not been able to find it. It had this cover and title: http://www.amazon.com/classic-arcade-video-jamma-board-Pc/dp/B007OX91II |
| ed12:
ok that is the same as a 39-1 board i have the same thing here... dip sw #2 cga or vga there is 2 combo's to the jamma i will pin then out for u ,if i cannot up-load the manual dip switch #3 is the refernce here..it is the blue /red switch u see on the board #2 controls it.. com 3 and 4 are for your trackball inputs and yes com8 is a molex power feed,as has been said to u.. thk-u op's for that 1 j1 is your audio jack >speakers< jamma is used for input control + power if u need ? do not allow the power supply to run past 5.5 volt's dc feed..it will damage the board let me find the maunual..i will up-load it it is built by game never over cga/vga-jamma ed |
| fatsgt:
--- Quote from: ed12 on July 03, 2014, 11:52:39 pm ---ok that is the same as a 39-1 board i have the same thing here... dip sw #2 cga or vga there is 2 combo's to the jamma i will pin then out for u ,if i cannot up-load the manual dip switch #3 is the refernce here..it is the blue /red switch u see on the board #2 controls it.. com 3 and 4 are for your trackball inputs and yes com8 is a molex power feed,as has been said to u.. thk-u op's for that 1 j1 is your audio jack >speakers< jamma is used for input control + power if u need ? do not allow the power supply to run past 5.5 volt's dc feed..it will damage the board let me find the maunual..i will up-load it it is built by game never over cga/vga-jamma ed --- End quote --- This is the online manual I referenced when I was hooking the game up: http://www.jammaboards.com/arcade_manuals/60-in-1_iCade_Classic_Arcade_Manual_Online.pdf I think it's the same 4 dip switches on the PCB for my board. Not sure I understand your statement:"dip switch #3 is the refernce here..it is the blue /red switch u see on the board #2 controls it.." or how it would help me get anything on the screen. Thanks |
| ed12:
on the board it is located as sw3 a 4 bank dip sw where s/w 2 of that bank is your cga/vga control ed |
| Navigation |
| Message Index |
| Next page |
| Previous page |