Main > Driving & Racing Cabinets

Logitech G25 or G27 Shifter and Sega Control Panel

(1/2) > >>

codeena:
Hi all,

Has anyone tried (and hopefully succeeded) disassembling the G25/G27 shifter and fitting it into a Sega twin racing control panel shifter mount? It seems like the G25 would fit, minus the section with d-pad and the dial to switch from sequential to 6-speed. I've been using the original mount with a sequential shifter hooked up to one G25 shifter and then my second G25 shifter was mounted to the right of the seat. I would switch plugs from a serial extension cable before putting in another game. But I'd rather to use a single shifter in the original Sega control panel, but having it look as close to the original as possible.

Thanks in advance.

vandale:
Hi, G25 is what I used:

http://forum.arcadecontrols.com/index.php/topic,138313.0.html

Any questions, point them my way

Brian74:
http://forum.arcadecontrols.com/index.php/topic,130821.msg1343586.html#msg1343586

Here is mine

BadMouth:
Also look through the stickied driving cab examples thread for some that just mount the wheel without extending the shaft.
Gbeef's build in particular.

codeena:

--- Quote from: vandale on June 27, 2014, 03:25:07 am ---Hi, G25 is what I used:

http://forum.arcadecontrols.com/index.php/topic,138313.0.html

Any questions, point them my way

--- End quote ---

Thanks for sharing vandale and you did an awesome job! May I ask how you secured the original outer plastic of the G25 shifter? I was thinking of screwing in the metal frame of the G25 shifter into the sega metal frame with some modification. How do you play sequential up/down-shifting games? I was hoping to be able to switch from up/down to 6spd. Thanks again

Navigation

[0] Message Index

[#] Next page